RS PRO Straight 50Ω Edge Mount SMA Jack, Solder Termination

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO SMA PCB End Launcher

From the trusted RS PRO brand, this SMA connector is a robust and reliable solution to RF connection and has a DC-18 GHz frequency range. It is edge mounting, so-called because it is designed to be mounted efficiently on the edge of a printed circuit board.

With gold plated beryllium copper contacts, this high-performance SMA end launcher assures a high-quality signal connection.

• Stock number 526-5757 is a 9.52 x 9.52mm square and accepts a PCB thickness of 1.7mm
• Stock number 526-5763 is a 9.52 x 9.52mm square and accepts a PCB thickness of 1.2mm
• Stock number 526-5785 is a 6.35 x 6.35mm square and accepts a PCB thickness of 1.57mm
• Stock number 526-5791 is a 6.35 x 6.35mm square and accepts a PCB thickness of 1.2mm

Features and Benefits

• End launcher SMA Jack
• Subminiature RF Coaxial Socket
• Gold plated body and contact
• Teflon insulator
• 50 Ohm Impedance

Applications

This SMA connector socket is designed for use from DC to 18 GHz, and is designed to connect to appropriate coaxial cable assemblies and SMA plugs with a secure screw-on action. This connector would typically be used in Wi-Fi antenna systems.

This edge mount jack is designed to be used in board-to-board applications, and can be secured and soldered for a sturdy connection.

Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Our range of connectors contains plugs, sockets and tool solutions to suit any installation.

Specificaties
Kenmerk Waarde
Coaxial Connector Type SMA Connector
Gender Female
Mounting Type Edge Mount
Impedance 50Ω
Termination Method Solder
Body Orientation Straight
Size Subminiature
Bulkhead No
Operating Frequency 0 → 18GHz
Body Plating Gold
Polarity Normal
Contact Material Beryllium Copper
Contact Plating Gold
943 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16948 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
5,58
(excl. BTW)
6,75
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 5,58
15 - 49
€ 5,23
50 - 99
€ 4,95
100 - 249
€ 4,69
250 +
€ 4,46
Related Products
The BNC is a bayonet style connector allowing ...
Description:
The BNC is a bayonet style connector allowing for quick connect and disconnect with a positive locking mechanism. Mating is achieved with just a quarter turn of the coupling nut. With a classic, dependable design, BNCs are suited to accommodate ...
75 Ohm True75™ BNC Jack, Edge Mount. Optimized ...
Description:
75 Ohm True75™ BNC Jack, Edge Mount. Optimized for 12G-SDI Broadcast Video solutionsTrue75™ 75 ohm impedanceStandard edge mount or die cast edge mountAvailable for .062" (1.60 mm) or .093" (2.40 mm) PCBs.
ZDC series PCB mount RF coaxial BNC socket ...
Description:
ZDC series PCB mount RF coaxial BNC socket connectors with MIL-C-39012 and MIL STD348A compatible interfaces and precision cast nickel plated zinc body. These ZDC series PCB mount RF coaxial jacks have a bayonet coupling for a quick mating connection ...
50 Ohm RF coaxial PCB/Panel Mount BNC jack ...
Description:
50 Ohm RF coaxial PCB/Panel Mount BNC jack connector with a VALOX body and gold centre contact. This RF coax BNC PCB connector has a mounting flange and is supplied with a lockwasher and nut.A jam nut is available separately, ...