Cinch Connectors Right Angle MMCX Connector, Plug

Wetgeving en compliance
Land van herkomst: US

Cinch RF Connector Tooling

The Cinch Connectivity series of high-quality Crimp Tools have been designed for professionals and serious DIY enthusiast. A frame made from the best quality steel, offer a long life and hassle-free operation. They feature a full cycle ratchet mechanism and quick release safety latch. (886-3155 does not feature a full cycle ratchet mechanism) Cinch crimp tools for RF connectors are suitable for various types of connector and various wire sizes.

Features and Benefits:
• A highly durable hand tool designed for professional use
• Frame made from high-quality steel for improved durability and long life operation

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

General Support Tooling

The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for which each tool is recommended. The 'Die Set Selection Guide' table indicates compatible cable types and their 'Group number' and details of frame tool required. A small number of crimp tools have been considered to be 'dedicated' to a connector type. These tools have been incorporated with those connector ranges on respective pages, and are not included within this General Tooling Range.

Kenmerk Waarde
Coaxial Connector Type MMCX Connector
Gender Male
Termination Method Crimp
Body Orientation Right Angle
Series MMCX
Series Number 141
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 39,51
10 - 24
€ 33,58
25 - 49
€ 30,38
50 +
€ 29,59
Related Products
Professional Grade 50 Ohm BNC solder plugs with ...
Professional Grade 50 Ohm BNC solder plugs with a PTFE dielectric, silver plated brass body and solder/clamp coaxial cable termination (stock number 680-7318 has MIL clamp termination). These Professional Grade 50 Ohm solder plugs are suitable for use with the ...
Professional grade UHF straight plug connector with a ...
Professional grade UHF straight plug connector with a solder/clamp coaxial termination, PTFE dielectric, silver plated brass body and silver plated brass centre contact. This UHF straight plug connector has a white silicone rubber gasket and a brass coupling nut and ...
Professional Grade 50 Ohm SMC PCB socket with ...
Professional Grade 50 Ohm SMC PCB socket with solder terminal, PTFE dielectric and gold plated brass body. This Professional Grade 50 Ohm SMC PCB socket has a 6.35 x 6.35mm square flange. Suitable for use with RG174 cable.
50 Ohm professional grade RF coaxial TNC cable ...
50 Ohm professional grade RF coaxial TNC cable solder jack with PTFE dielectric, solder/clamp coaxial cable termination and a silver plated brass body. This 50 Ohm professional grade TNC RF coaxial cable solder jack is for use with the following ...