Hirose Coaxial Socket

  • RS-stocknr. 619-6416
  • Fabrikantnummer MS-147(01)
  • Fabrikant Hirose
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

MS-156 Switch Receptacle

In today's wireless world, testing of RF devices requires a different approach. The MS-156 coaxial switch and test contact provides a simple and reliable method of inspection for high frequency circuits.
With the contact mounted on the board, performance can be tested by inserting one of the external plugs, this switches the circuit to the test probe allowing accurate testing of the equipment. The MS-156 has a low insertion loss of 0.1dB at 6GHz making it almost transparent. Removal of the test probe will then automatically switch to the internal circuit.
The contact is small, only 2.7mm by 2.7mm and 1.6mm high, weighing only 0.025g it can fit neatly into any design operating up to 6GHz.
A variety of SMA test adaptors are available for hand testing in the laboratory or fully automatic testing on a production line.

37 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2,19
(excl. BTW)
2,65
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 2,19
15 - 49
€ 2,11
50 - 99
€ 1,85
100 - 249
€ 1,75
250 +
€ 1,53
Related Products
U.FL SeriesBeing one of the smallest SMT ultra ...
Description:
U.FL SeriesBeing one of the smallest SMT ultra miniature connectors, Hirose U.FL provides a low mated height of 2.5mm whilst occupying only 7.7mm² board space.The U.FL RF connector offers performance from DC to 6 GHz. This make the U.FL suitable ...
In test laboratories where the final testing of ...
Description:
In test laboratories where the final testing of devices requires frequent mating QUICK – MATE will be found to be the ideal choice. Standard interfaces N, SMA and TNC. Designed without coupling nut making for fast and reliable test connectorsBy ...
Professional Grade 75 Ohm bulkhead rear and front ...
Description:
Professional Grade 75 Ohm bulkhead rear and front mounting jack-jack adapters with a nickel plated brass body requiring a 12 x 12.7mm panel cut-out.Stock number 680-7469 has a DELRIN dielectricStock number 718-2556 has a PTFE dielectric.
A series of connectors to MIL specifications with ...
Description:
A series of connectors to MIL specifications with high quality materials and PTFE insulation. Non-constant impedance design, suitable for use up to 500V peak and 200MHz, or up to 500MHz with diminished performance. For 50Ω cable use crimp tool stock ...