Ruland Shaft Collar Two Piece Clamp Screw, Bore 30mm, OD 54mm, W 15mm, Carbon Steel

  • RS-stocknr. 174-7156
  • Fabrikantnummer OF-MSP-30-F
  • Fabrikant Ruland
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Ruland OF-MSP-30-F is a two-piece shaft collar with 30mm bore, 54mm OD, and 15mm width. OF-MSP-30-F has OD flats and tapped holes for mounting shaft collars to each other or adjacent components. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. OF-MSP-30-F is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Specificaties
Kenmerk Waarde
Single/Double Wide Single
One/Two Piece Two Piece
Fastening Clamp Screw
Shaft Diameter 30mm
Threaded Bore Size M6 x 18
Outside Diameter 54mm
Width 15mm
Material Carbon Steel
Finish Black Oxide
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
24,43
(excl. BTW)
29,56
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 24,43
5 - 9
€ 23,71
10 +
€ 22,98
Related Products
Ruland ENCL30-15MM-SS is a one-piece shaft collar with ...
Description:
Ruland ENCL30-15MM-SS is a one-piece shaft collar with a 15mm bore, 30mm OD, and 8mm width. The thin line design reduces weight and allows for use in confined spaces. It has the clamp style benefits of not marring the shaft, ...
The Ruland two-piece shaft collar has dimensions of ...
Description:
The Ruland two-piece shaft collar has dimensions of 10mm bore, 24mm OD and 9mm width. It is made from 303 stainless steel with a bright finish. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ ...
Clamp shaft collars do not mar the shaft, ...
Description:
Clamp shaft collars do not mar the shaft, are easy to remove and are indefinitely adjustable. They are commonly used for guiding, spacing, stopping, mounting and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of ...
Simple installation and adjustment Clamp grips shaft without ...
Description:
Simple installation and adjustment Clamp grips shaft without leaving score marksBlack oxide finishHugs the shaft with all round grip Effective on hardened or plain shafts.