Ruland Shaft Collar Two Piece Clamp Screw, Bore 35mm, OD 57mm, W 15mm, Aluminium

  • RS-stocknr. 174-7159
  • Fabrikantnummer OF-MSP-35-A
  • Fabrikant Ruland
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Ruland OF-MSP-35-A is a two-piece shaft collar with 35mm bore, 57mm OD, and 15mm width. OF-MSP-35-A has OD flats and tapped holes for mounting shaft collars to each other or adjacent components. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. OF-MSP-35-A is commonly used for guiding, spacing, stopping, mounting, and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity (TIR of ≤ .05mm). Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power.

Specificaties
Kenmerk Waarde
Single/Double Wide Single
One/Two Piece Two Piece
Fastening Clamp Screw
Shaft Diameter 35mm
Threaded Bore Size M6 x 18
Outside Diameter 57mm
Width 15mm
Material Aluminium
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 15-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
39,14
(excl. BTW)
47,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 39,14
5 - 9
€ 37,90
10 +
€ 36,77
Related Products
The Ruland two-piece shaft collar has an innovative ...
Description:
The Ruland two-piece shaft collar has an innovative thin line design that enables it to be used in confined spaces. The dimensions of the shaft collar are 10mm bore, 20mm OD and 5.5mm width. It is made from 2024-T351 aluminium ...
Ruland OF-MCL-25-F is a one-piece shaft collar with ...
Description:
Ruland OF-MCL-25-F is a one-piece shaft collar with 25mm bore, 45mm OD, and 15mm width. OF-MCL-25-F has OD flats and tapped holes for mounting shaft collars to each other or adjacent components. The clamp style design does not mar the ...
The Ruland one-piece shaft collar has dimensions of ...
Description:
The Ruland one-piece shaft collar has dimensions of 30mm bore, 54mm OD and 15mm width. It is made from aluminium. It has OD flats and tapped holes for mounting shaft collars to each other or the adjacent components. It can ...
Clamp shaft collars do not mar the shaft, ...
Description:
Clamp shaft collars do not mar the shaft, are easy to remove and are indefinitely adjustable. They are commonly used for guiding, spacing, stopping, mounting and component alignment. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of ...