FTDI Chip, 3.3 V TTL USB to UART Evaluation Board - TTL-232R-3V3-PCB

  • RS-stocknr. 429-284
  • Fabrikantnummer TTL-232R-3V3-PCB
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

FTDI Chip USB To UART Evaluation Board

The FTDI Chip USB to UART evaluation board is a USB to TTL serial UART converter PCB, incorporating FTDI’s FT232RQ USB to serial UART interface IC device that handles all the USB signalling and protocols. This PCB provides a fast and simple way to connect devices with a TTL level serial interface to USB. It supports 3.3V UART signalling and has 5V or 75mA power output.

Features and Benefits

Connects directly to a microcontroller UART or I/O pins
Data transfer rates from 300 baud to 3Mbaud at TTL levels
Internal EEPROM with user writeable area
Support for FT232R FTDI Chip-ID feature for improved security
PCB is USB powered, no external supply required
Low USB bandwidth consumption
UHCI/OHCI/EHCI host controller compatible
USB 2.0 full speed compatible

Applications

USB to serial TTL level converter
Upgrading legacy peripherals to USB
Interface microcontroller UART or I/O to USB
Interface FPGA/PLD to USB
USB instrumentation PC interface
USB industrial control
USB software/hardware encryption dongles

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
CE
FCC certified

Specificaties
Kenmerk Waarde
Kit Classification Evaluation Board
Kit Name 3.3 V TTL
92 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
27 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,39
(excl. BTW)
16,20
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 13,39
10 - 19
€ 11,47
20 - 49
€ 11,34
50 - 99
€ 11,18
100 +
€ 10,99
Related Products
The NCN5150 is a single-chip integrated slave transceiver ...
Description:
The NCN5150 is a single-chip integrated slave transceiver for use in two-wire Meter Bus (M-BUS) slave devices and repeaters. The transceiver provides all of the functions needed to satisfy the European Standards EN 13757-2 and EN 1434-3 describing the physical ...
L6362A IO-Link device transceiver main characteristics:IO-Link PHY layerDedicated ...
Description:
L6362A IO-Link device transceiver main characteristics:IO-Link PHY layerDedicated overload diagnostics pinUART interfaceSelectable 12 mA 3.3 V or 10 mA 5.0 V linear regulatorOverload and overheating protections with non-dissipative cut-off functionFull reverse polarity on IO-Link interface pinsEMC protections ...
Description:
The AVX Wi-Fi / BT / ZigBee ceramic antennas is from a series of ceramic isolated magnetic dipole™ (IMD) antennas deliver on the key needs of device designers for higher functionality and performance in smaller/thinner designs. Superior RF field containmentQuicker ...
High speed Serial-to-Ethernet gateway module with an RJ-45 ...
Description:
High speed Serial-to-Ethernet gateway module with an RJ-45 jackHigh stability and reliability Ethernet connection solution10/100Mbps Ethernet interface supported with full hardwired TCP/IP stack chip W5100Up to 230Kbps serial communication interfaceSerial configuration commands support: Simple command frame ...