FTDI Chip, Male DB9 Format USB to RS232/UART Converter Module - DB9-USB-M

  • RS-stocknr. 715-8535
  • Fabrikantnummer DB9-USB-M
  • Fabrikant FTDI Chip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

FTDI Chip Db9-USB To UART Converter Module

The FTDI Chip DB9-USB to UART converter module is used to upgrade an RS232 port to an active USB port without the need to redesign the PCB. The family consist of 6 modules, 2 of them operate at RS232 voltage levels while 4 of them operate at digital voltage level (a choice of 5V or 3.3V). Each of these is available to replace a male DB9. This active connector contains all the USB to UART (and vice versa) conversion electronics and is designed to fit directly into the same PCB footprint as a PC compatible UART DB9 connector.

Features and Benefits

Easy placement for an standard male RS232 DB9 footprint of a device
A selection of RS232, 3.3V or 5V UART signal levels
Works with USB 1.1 & 2.0 Host and Hub ports
Industry Standard FTDI chip set & device drivers for maximum compatibility
Microsoft Windows® WHQL-certified, Mac OS X, Linux and Windows CE device drivers
Installs as a standard Windows COM port
Has 128 byte transmit buffer and 256 byte receive buffer
Powered by USB port, no external power adapter required
Serial port speed up to 1Mbps
Operating temperature ranges between -40°C and 85°C

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Kit Classification Converter Module
Kit Name Male DB9 Format
204 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
247 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
16,61
(excl. BTW)
20,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 16,61
5 - 9
€ 15,12
10 +
€ 14,66
Related Products
These modules are MCU to USB host controller ...
Description:
These modules are MCU to USB host controller development modules for the Vinculum VNC1L device. They are supplied on a PCB designed to fit into 24-pin or 40-pin DIP sockets and provide access to the UART, parallel FIFO and SPI ...
These USB to RS-232 / RS-422 / RS-485 ...
Description:
These USB to RS-232 / RS-422 / RS-485 converters provide a fast and simple method to convert serial UART to USB. The USB connector contains a small circuit board featuring the FTDI FT232RQ (RS 730-0168) serial UART interface IC to ...
The VNC2 is the second of FTDI’s Vinculum ...
Description:
The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), ...
V2-Eval Board is intended for use as a ...
Description:
V2-Eval Board is intended for use as a hardware platform to enable easy evaluation of FTDI“s Vinculum-II VNC2 series of embedded USB Host / Slave controllers. The V2-Eval Board includes all the necessary components required by a user to begin ...