xPico is an extremely compact System-on-Module that provides 10Base-T or 100Base-TX Ethernet connectivity on virtually any device with a UART serial interface. The included industry-proven Lantronix device server application and full IP stack allow seamless remote access to device data simplifying design integration while providing robust connectivity. A key feature of the xPico is that there is virtually no need to write a single line of code, translating to a much lower development cost and faster time-to-market.
XPC100100B-01 xPico Ethernet Module (RS Part No. 783-2740) Ethernet 10Base-T or 100Base-TX (Auto-sensing) Protocols: TCP/IP, UDP/IP, ARP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, AutoIP, and HTTP SNMP, Telnet, Serial, Internal Web Server, and Microsoft Windows-based utility for web configuration Security: 256-bit AES Encryption Internal Web Server: Storage Capacity: 384KB for Web Pages Based on the DSTni-EX Enhanced 16-bit x86 architecture with 512KB Flash memory, 256KB SRAM Firmware upgradeable via TFTP and Serial Port Host communication: serial UART with RTS/CTS flow control Data Rate: 300bps to 921.6kbps 8 x GPIO pins Power supply: +3.3Vdc Operating temperature range: -40 to +85°C Package format: SMT Dimensions: 24 x 16.5 x 5.64mm Included Software: MS Windows-based DeviceInstaller, Com Port Redirector
XPC100100K-02 xPico Ethernet Development Kit (RS Part No. 783-2744) XPC100100B-01 xPico Ethernet Module DE9 serial port connector for RS-232/422/485 communication DE9 serial port connector for RS-232 communication RJ45 Ethernet connector and PoE port miniUSB socket with UART-USB Bridge On-board Power-over-Ethernet (PoE) regulator System and Ethernet status LEDs Header for access to all logic xPico pins Reset pushbutton Set Default pushbutton Power switch Powered from USB or Ethernet connection
