Analog Devices, USBi Converter USB to I2C and SPI Interface Board, EVAL-ADUSB2EBZ

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

USB-to-I²C and SPI Converter, Analog Devices

The EVAL-ADUSB2EBZ USBi device is a stand-alone communications interface, featuring USB-to-I²C and SPI conversion. It connects to a PC USB port and provides either I²C or SPI access to the evaluation board through a ribbon cable. It is compatible with 1.8V and 3.3V target devices and allows for SigmaStudio™ integration for most SigmaDSP® processors. The USBi is powered via the USB cable. The ribbon cable also carries the 5V power supply, which can be used to power the target board if desired.
A small interface board, the ADZS-USBI2EZB (881-3090), allows the EVAL-ADUSB2EBZ to connect to the following Analog Devices evaluation boards and kits: ADSP-21364 EZ-Kit, ADSP-21369 EZ-Kit, ADSP-21469 EZ-Board, ADSP-21479 EZ-Board and ADSP-21489 EZ-Board SHARC®

881-3006 EVAL-ADUSB2EBZ USB to I²C and SPI Interface Evaluation Board
881-3012 EVAL-ADUSB2EBUZ USB to I²C and SPI Interface Evaluation Board
881-3090 ADZS-USBI2EZB SigmaStudio USBi to Ez-Board Adapter

USB (Universal Serial Bus), Analog Devices

Specificaties
Kenmerk Waarde
Kit Classification Development Kit
Kit Name USBi Converter
8 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
95,46
(excl. BTW)
115,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 95,46
Related Products
The ClockBuilder Pro Field Programmer when used with ...
Description:
The ClockBuilder Pro Field Programmer when used with ClockBuilder Pro software, makes it simple for systems designers to develop, program and debug any Si534x or Si538x clock device “in-system”, or in one of the convenient QFN sockets. The field programmer ...
The LC234X module provides a low cost USB ...
Description:
The LC234X module provides a low cost USB to UART bridge using the FT234XD IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
This Analog Devices evaluation board demonstrates the isolation ...
Description:
This Analog Devices evaluation board demonstrates the isolation of an LVDS interface. The advantages of isolating LVDS interfaces include protection against fault conditions (safety isolation) and improving robustness (functional isolation). The circuit is an ideal solution for many instrumentation, automation ...
Evaluation boards designed to reduce development time for ...
Description:
Evaluation boards designed to reduce development time for EA eDIP series of intelligent graphic display modules, from Electronic Assembly, such as stock no. 758-8784. USB interface to connect directly to PCLEDS to show data trafficWide voltage range +3.3V to +5VSounder ...