Male Crimp Terminal 173041 Series for use with ValuSeal Plug Housing 172877

  • RS-stocknr. 134-8814
  • Fabrikantnummer 173041-0001
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Molex ValuSeal™ Male and Female Terminals

A range of male and female contacts for use with the Molex ValuSeal ™ wire-to-wire connector system. These crimp contacts are made from copper alloy with a tin plating. The pin and socket contacts are rated at 11A per contact and have a suggested wire size of 16 AWG to 18 AWG. See part numbers 134-8798 and 134-8799 for typical connector housings.

Features and Benefits

• 11A per contact
• 16 AWG to 18 AWG wire size
• Crimp or compression

Molex ValuSeal™ Range

Specificaties
Kenmerk Waarde
Accessory Type Male Crimp Terminal
For Use With ValuSeal Plug Housing 172877
Series 173041
700 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
700 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (On a Reel of 100)
0,039
(excl. BTW)
0,047
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
100 - 900
€ 0,039
€ 3,90
1000 - 2400
€ 0,026
€ 2,60
2500 - 4900
€ 0,026
€ 2,60
5000 +
€ 0,025
€ 2,50
*prijsindicatie
Verpakkingsopties
Related Products
Deutsch DTM Series connectors are ideal for transport ...
Description:
Deutsch DTM Series connectors are ideal for transport and other harsh environment signal connector applications. THey are often used in engine compartments and transmission tunnels. The DTM series features a smaller contact and enhanced design in comparison to the DT ...
Metri-Pack 150 OBD II On-Board diagnostic automotive connectors ...
Description:
Metri-Pack 150 OBD II On-Board diagnostic automotive connectors designed for under dash applications. These Metri-Pack 150 OBD II On-Board diagnostic automotive connectors are designed to meet SAE J1962 specifications using ISO standard male terminals. The Male test equipment automotive connector ...
Deutsch DT Series connector plugs and receptacles are ...
Description:
Deutsch DT Series connector plugs and receptacles are designed for cable to cable automotive applications within the engine compartment, chassis or cab. These harsh environment connectors provide reliability and excellent performance where even a small degree of connector contact degradation ...
This Test Summary covers the 3.68 mm center ...
Description:
This Test Summary covers the 3.68 mm center Line (pitch) connector series terminated with 16 to 22 AWG wire using Crimp technology with Tin plating. EconoLatch® Plug Housing, Single Row, with Panel Mount Latch, 2 Circuits.