Female Crimp Terminal 150181 Series for use with EconoLatch Wire-to-Wire Interconnects

  • RS-stocknr. 136-5654
  • Fabrikantnummer 150181-1016
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

This Test Summary covers the 3.68 mm centerline (pitch) connector series terminated with 16 to 22 AWG wire using Crimp technology with Tin plating.

EconoLatch® Female Terminal, 16-18 AWG, Tin (Sn) Plated, Reel

Specificaties
Kenmerk Waarde
Accessory Type Female Crimp Terminal
For Use With EconoLatch Wire-to-Wire Interconnects
Series 150181
2100 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Reel of 100)
0,029
(excl. BTW)
0,035
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
100 - 900
€ 0,029
€ 2,90
1000 - 2400
€ 0,019
€ 1,90
2500 - 4900
€ 0,018
€ 1,80
5000 +
€ 0,017
€ 1,70
*prijsindicatie
Related Products
Weather-Pack hand crimp tool for crimping Weather-Pack male ...
Description:
Weather-Pack hand crimp tool for crimping Weather-Pack male pin and female sleeve crimp terminals. This Weather-Pack hand crimp tool will crimp a cable range of 2 to 0.50mm2.
From EDAC, a series of wire seals for ...
Description:
From EDAC, a series of wire seals for the 572 range of waterproof connectors. The silicone rubber wire seals are crimped with the contacts providing extra protection at the rear of the housing. The wire seals in the 572 range ...
A range of male and female contacts for ...
Description:
A range of male and female contacts for use with the Molex ValuSeal ™ wire-to-wire connector system. These crimp contacts are made from copper alloy with a tin plating. The pin and socket contacts are rated at 11A per contact ...
A range of Pre-crimped leads for use with ...
Description:
A range of Pre-crimped leads for use with the Molex ValuSeal™ range of connector housings, see typical part numbers 134-8798 and 134-8799. The pre-crimped leads are available in male to male and female to female configurations in lengths of 150 ...