LM393N/NOPB Texas Instruments, Comparator, Single Ended O/P, 1.3μs 2 → 36 V 8-Pin PDIP

Wetgeving en compliance

Comparators, Texas Instruments

Texas Instruments’ range of voltage comparators includes not only conventional single, dual and quad comparator packages but also window comparators and over- & under-voltage supervisors.

Although comparators and operational amplifiers are superficially similar devices their operation in practical applications is very different. Op amps are intended for linear operation accompanied by suitable feedback whereas comparators are tailored for rapid switching and generally operated in open-loop mode. Dedicated voltage comparators have significantly shorter propagation delays and are capable of faster response times under saturated conditions. Most comparators are also more tolerant of high differential input voltages and many have open-collector outputs allowing parallel operation with other devices.

Kenmerk Waarde
Comparator Type Dual Voltage Comparator
Mounting Type Through Hole
Package Type PDIP
Power Supply Type Dual, Single
Output Type Single Ended
Number of Channels per Chip 1
Typical Response Time 1.3µs
Pin Count 8
Typical Single Supply Voltage 2 → 36 V
Dimensions 10.16 x 6.6 x 4.57mm
Length 10.16mm
Width 6.6mm
Height 4.57mm
Minimum Operating Temperature 0 °C
Typical Voltage Gain 200 V/mV
Typical Dual Supply Voltage ±1 → ±18V
Maximum Operating Temperature +70 °C
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 0,856
€ 8,56