RS PRO Component & IC Tester, Resistance Measurement Resolution 100mΩ, Capacitance Measurement Resolution 0.1pF

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO ICT 76 Component Tester

From RS PRO comes a low cost, battery powered component tester with a 3 digit LCD display and a maximum reading of 1999. The RS PRO ICT 76 measures a number of electrical parameters which include resistance, capacitance, diode and others making it ideal for use in field service and production environments.

Features and Benefits

  • Measures resistance and capacitance up to 20mF

  • Transistor hFE measurement

  • Transistor leakage current measurement

  • SCRs/thyristors test

  • Diode Test

  • LED test

  • Silicon controlled rectifier test - good/bad test result

  • Battery test

  • 2000 count digital display

  • Low battery indication and overload protection

  • Dimensions: 175 mm x 84 mm x 31 mm

  • Tilt stand for easier reading

  • Weight (including battery) 340 g without holster, 550 g with holster

Typical Applications

Component & IC Testers are devices used to test ICs (Integrated Circuits) and SMD (Service Mounting Devices) and measure a range of electrical parameters such as voltage, resistance, capacitance, diode, continuity and more. Component & IC testing devices are available in a range of devices, many of which are portable hand held devices. These testers are commonly used in applications such as:

  • Production

  • Trouble shooting

  • Maintenance

FAQs

Does this require batteries?
RS PRO ICT 76 is powered by 9 V alkaline battery.

Supplied with

ICT76 component tester, set of test leads (1 x black & 1 x red), operating manual and protective holster

Specificaties
Kenmerk Waarde
Resistance Measurement Resolution 100mΩ
Capacitance Measurement Resolution 0.1pF
Tester Type Component, IC
Display Type LCD
Battery Life 200 h
Battery Type Alkaline
Power Source Battery
Dimensions 84 x 31 x 175mm
Weight 330 (with Battery)g
Height 175mm
Length 84mm
Maximum Capacitance Measurement 20mF
Maximum Operating Temperature +50°C
Maximum Resistance Measurement 20 MΩ
Width 31mm
Minimum Resistance Measurement 200Ω
Minimum Capacitance Measurement 20pF
Minimum Operating Temperature 0°C
Model Number p ICT76
18 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
67,00
(excl. BTW)
81,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 67,00
Related Products
The Atlas SCR will identify the device type, ...
Description:
The Atlas SCR will identify the device type, display the pinout and measure gate sensitivity. Connect any way roundThyristor and Triac identificationAutomatic pinout identificationGate sensitivity checking from 100uA to 90mALoad current test up to 100mAShorted junction testingAuto power on and ...
DET24C Additional Features. Ground resistance range : 0.050 ...
Description:
DET24C Additional Features. Ground resistance range : 0.050 Ω to 1500 ΩTrue RMS Ground leakage current range : 0.2 mA to 35 AAuto ranging & HOLD function4 digit plus 6 digit backlit LCD displayHigh and low resistance alarms256 test results ...
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...