Peak DCA55 Component & IC Tester Component, Model DCA55

  • RS-stocknr. 410-0176
  • Fabrikantnummer DCA55
  • Fabrikant Peak
Wetgeving en compliance
Land van herkomst: GB

Peak Component And IC Tester

The Peak component and IC tester component is an intelligent component analyser. It is 20mm high, 70mm wide and 103mm long. The DCA55 tester can analyse a vast number of different component types including bipolar transistors, MOSFETs, thyristors, triacs, diodes, LEDs and others. It provides information such as component type and pin out along with measurable parameters like gain, gate threshold voltages, voltage drops and more.

Features and Benefits

Auto and manual power-off
Automatic component identification
Automatic pin out identification
Scrollable pages of information


Identification of different LED types such as 2 or 3 terminal bicolour types
Identification of diode networks such as common anode, common cathode, series and inverse parallel types
Identification of special component features such as diode protection or resistor shunts on transistors
Measurement of MOSFET gate thresholds
Measurement of semiconductor voltage drops for transistors, diodes and LEDs
Measurement of transistor gain from 2 to 65000

Kenmerk Waarde
Tester Type Component
Battery Type GP23A
Power Source Battery
Dimensions 103 x 70 x 20mm
Height 20mm
Length 103mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Model Number p DCA55
Width 70mm
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 85,08
Related Products
Ideal-tek ST-LED is a specialised solution for testing ...
Ideal-tek ST-LED is a specialised solution for testing and verifying SMD and through-hole LEDs. Its design combines a pair of high quality gold-plated tweezers and a digital adaptive LED tester in a compact, lightweight, battery-powered instrument. Convenient one-hand operationInstrument of ...
From RS PRO comes a low cost, battery ...
From RS PRO comes a low cost, battery powered component tester with a 3 digit LCD display and a maximum reading of 1999. The RS PRO ICT 76 measures a number of electrical parameters which include resistance, capacitance, diode and ...
The RS PRO LCR 1707 are great value ...
The RS PRO LCR 1707 are great value smart tweezers. This device is like a pair of tweezers but has an LCR meter attached, designed for surface mount components. You use them by putting the components between the tips of ...
Component testing tweezers from RS PRO are an ...
Component testing tweezers from RS PRO are an excellent tool ideal for testing various types of SMD (service mounting device) electrical components. The RS PRO testing tweezers feature an automatic DCV or ACV selection, capacitance, resistance, continuity and diode selection, ...