S/steel stud coupling,1/4in BSPT Mx8mm

  • RS-stocknr. 439-420
  • Fabrikantnummer 1805 08 13
  • Fabrikant Legris
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Male Stud Coupling

In-line connection of tubing with a male thread

Maximum working pressure: 80 bar
Olive: Stainless steel 316L
Body: Stainless steel 316L
Nut: Stainless steel 316L

Compression Fittings – Stainless Steel

Compression fittings suitable for use with a variety of tube materials including stainless steel, PTFE, semi-rigid nylon and polyurethane. Maximum working pressure is 80 bar (1160 psi) and maximum working temperature is 250°C at working pressure. The fittings can also be used for industrial vacuum applications.

Specificaties
Kenmerk Waarde
Fitting Type Coupler
Threaded Connection 1/4 in BSPT Male
Fitting Direction Straight
Thread Size 1/4in
Thread Standard BSPT
223 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
16,67
(excl. BTW)
20,17
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 16,67
5 - 9
€ 16,15
10 +
€ 15,64
Related Products
Brass fittings for fluid distribution. Suitable for connecting ...
Description:
Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.
Compression fittings suitable for use with a variety ...
Description:
Compression fittings suitable for use with a variety of tube materials including stainless steel, PTFE, semi-rigid nylon and polyurethane. Maximum working pressure is 80 bar (1160 psi) and maximum working temperature is 250°C at working pressure. The fittings can also ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...