Conex-Banninger 12mm Straight Coupler Brass Compression Fitting

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Straight Coupler Conex x Conex

Approvals

WRAS

Standards

BS 2871 Part 1; BS 864 Part 2

Fittings - Brass Straights & End Stops

High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories
Suitable for connecting copper tubes in accordance with BS2871 part 1
These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters
The compression fitting range is manufactured in accordance with BS864 part 2
Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings

Specificaties
Kenmerk Waarde
Compression Connection Pipe Diameter 12mm
Fitting Type Coupler
Material Brass
Fitting Direction Straight
48 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
4,36
(excl. BTW)
5,28
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
€ 4,36
€ 8,72
10 - 18
€ 4,185
€ 8,37
20 - 48
€ 4,095
€ 8,19
50 +
€ 4,00
€ 8,00
*prijsindicatie
Related Products
Nickel-plated brass threaded adaptors is the largest range ...
Description:
Nickel-plated brass threaded adaptors is the largest range of RS Pro. Countless configurations in multiple sizes: nipples, reductions, plugs, T, L, hose adaptors. High performances in pressure and temperatures (+300°C). Sharp threads BSPT, BSPP & Metric. Aluminium manifolds and silencers ...
High quality Water Research Council (WRC) approved copper ...
Description:
High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are ...
ENOTS compression fittings are ideal for most general ...
Description:
ENOTS compression fittings are ideal for most general industrial applications. Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
Compression fittings suitable for use with a variety ...
Description:
Compression fittings suitable for use with a variety of tube materials including stainless steel, PTFE, semi-rigid nylon and polyurethane. Maximum working pressure is 80 bar (1160 psi) and maximum working temperature is 250°C at working pressure. The fittings can also ...