Conex-Banninger 15mm x 1/4 in BSPP Male Straight Coupler Brass Compression Fitting

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Straight Coupler Conex x Male BSP Parallel Thread

Approvals

WRC

Standards

BS 2871 Part 1; BS 864 Part 2

Fittings - Brass Straights & End Stops

High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessories
Suitable for connecting copper tubes in accordance with BS2871 part 1
These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many types of plastic pipes with size compatible outside diameters
The compression fitting range is manufactured in accordance with BS864 part 2
Working temperatures/pressures listed in the Key Characteristics table are based on BS864 Part 2. The table also indicates gases and fluids suitable for this range of fittings

Specificaties
Kenmerk Waarde
Compression Connection Pipe Diameter 15mm
Fitting Type Coupler
Material Brass
Threaded Connection 1/4 in BSPP Male
Fitting Direction Straight
Thread Size 1/4in
Thread Standard BSPP
Gender Male
146 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
Was € 5,07
4,195
(excl. BTW)
5,076
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
€ 4,195
€ 8,39
10 - 18
€ 4,025
€ 8,05
20 - 48
€ 3,94
€ 7,88
50 +
€ 3,855
€ 7,71
*prijsindicatie
Related Products
In-line connection of tubing with a male thread. ...
Description:
In-line connection of tubing with a male thread. Maximum working pressure: 80 barOlive: Stainless steel 316LBody: Stainless steel 316LNut: Stainless steel 316L.
Compression fittings suitable for use with a variety ...
Description:
Compression fittings suitable for use with a variety of tube materials including stainless steel, PTFE, semi-rigid nylon and polyurethane. Maximum working pressure is 80 bar (1160 psi) and maximum working temperature is 250°C at working pressure. The fittings can also ...
Brass fittings for fluid distribution. Suitable for connecting ...
Description:
Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.
Brass fittings for fluid distribution. Suitable for connecting ...
Description:
Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.