S/steel bulkhead coupling,6x6mm OD

  • RS-stocknr. 231-5089
  • Fabrikantnummer 1816 06 00
  • Fabrikant Legris
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Bulkhead Coupling

//media.rs-online.com/t_line/L231508-05.gif

Compression Fittings – Stainless Steel

Compression fittings suitable for use with a variety of tube materials including stainless steel, PTFE, semi-rigid nylon and polyurethane. Maximum working pressure is 80 bar (1160 psi) and maximum working temperature is 250°C at working pressure. The fittings can also be used for industrial vacuum applications.

Specificaties
Kenmerk Waarde
Fitting Type Coupler
Fitting Direction Straight
16 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
32,56
(excl. BTW)
39,40
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 32,56
5 - 9
€ 31,56
10 +
€ 30,54
Related Products
BoWex® Curved-tooth gear couplings® are flexible shaft connections ...
Description:
BoWex® Curved-tooth gear couplings® are flexible shaft connections for a positive torque transmission and used to compensate for axial, radial and angular shaft misalignment. Using curved-tooth gear couplings® avoids any edge pressure in the spline plus angular and radial displacements ...
Brass fittings for fluid distribution. Suitable for connecting ...
Description:
Brass fittings for fluid distribution. Suitable for connecting steel, copper and nylon tubing. Applications include compressed air, hydrocarbon, water and lubrication.
High Quality Water Research Advisory Scheme (WRAS) approved ...
Description:
High Quality Water Research Advisory Scheme (WRAS) approved type A brass compression fittings and accessoriesSuitable for connecting copper tubes in accordance with BS2871 part 1These fittings are also suitable for connecting low carbon steel tube, stainless steel tube and many ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...