RS PRO Steel Alloy Compression Spring, 45.5mm x 10.8mm, 0.49N/mm

Wetgeving en compliance
Land van herkomst: GB

RS PRO Music Wire Steel Compression Springs

A range of compression springs from our RS PRO offer which come in various sizes and lengths and with closed and ground and closed not ground end types. Compression springs are very popular as they can store a large amount of energy in a small space making them ideal for a great range of uses.

These RS PRO compression springs also referred to as coil springs have varying degrees of stiffness which is also known as spring rate.
Coiled springs are designed so they can push back to the springs original height when they are compressed. These springs are used to keep components from meeting.

RS PRO have a great range of compression springs with wire diameters from 0.2 to 2.2 mm and spring rates from 0.06 N/mm to 22.56 N/mm.

Features and Benefits:

Coil spring design for strength and elasticity
Wire diameter ends up to 0.8 mm are squared and unground
Wire diameter ends 1.00 mm and over are squared and ground
Manufactured with a right hand helix
Material; Steel Alloy
Spring can be directly put on the rod products or put into the tube products

Typical Applications:

Compression springs are a very popular spring and can be used in a number of different industries. This type of spring can be used in:
Ball point pens
Mobile phones
Electrical switches

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO seal of approval if we’re confident of their exceptional quality, which means you can be confident too.


The load at minimum working length is the load required to compress the spring to that length. All dimensions and forces to conform to DIN 2095 (grade 2).

Kenmerk Waarde
Outside Diameter 10.8mm
Wire Diameter 0.8mm
Free Length 45.5mm
Minimum Working Length 14.3mm
Load at Minimum Working Length 15.4N
Spring Rate 0.49N/mm
Ends Closed (Square)/Unground
530 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1740 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 1,039
€ 10,39