Chemtronics Silver Conductive Adhesive Epoxy, 0.25 oz Tube

  • RS-stocknr. 496-265
  • Fabrikantnummer CW2400
  • Fabrikant Chemtronics
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Chemtronics Conductive Epoxy

The Chemtronics 0.25oz silver conductive epoxy is a two-part adhesive used in prototype, repair and general conductive bonding with a volume resistivity of less than 0.001ohm-cm. It features strong mechanical bond, excellent electrical conductivity and quick room temperature curing. The conductive epoxy bonds aggressively to a wide variety of materials and are generally compatible with most materials used in printed circuit board fabrication. As with any adhesive/sealant, compatibility with substrate should be determined on a non-critical area before use. it has an extended pot life for high strength conductive bonds. Components can be easily placed and replaced before full cure occurs and for an accelerated cure, simply heat the material to 100°C (212°F).

Features and Benefits

• Cure time is 24 hours
• Simple mixing ratios
• High strength bond
• Operating temperature ranges between -91°C (-131°F) and 100°C (212°F)
• Pot life is 8-10 minutes at 25⁰C after mixing
• Quick solderless electronic connections
• Repairs defective traces and creates jumpers on boards
• Mixed material provides 5-minute work time, fast cure
• Conductive silver epoxy provides excellent electrical conductivity

Applications

• Conductive bonds between heat sensitive components
• Solderless surface mount connections
• Circuit board trace repairs
• Static discharge and grounding
• Solder repairs
• Conductive structural adhesions

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Product Type Epoxy
Conductive Element Silver
Package Type Tube
Package Size 0.25 oz
Cure Time 24 h
133 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
107,62
(excl. BTW)
130,22
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 107,62
Related Products
A 2-part, fast setting (4-5 minutes), toughened acrylic ...
Description:
A 2-part, fast setting (4-5 minutes), toughened acrylic adhesive for high strength structural bonding applications. The adhesive Bonds well to Aluminium, metal, wood etc and provides a tough flexible bond line. Supplied in 50ml twin cartridge, it requires applicator gun, ...
Micro-tip pen for drawing conductive traces on flexible ...
Description:
Micro-tip pen for drawing conductive traces on flexible and ITO surfaces. Quickly creates flexible conductive silver traces on flex circuitryMicro tip for precise applicationsDries in minutes at room temperatureHighly adherent silver-based polymer systemRepairs conductive traces on flexible circuits and indium ...
The Loctite 11g epoxy resin adhesive is a ...
Description:
The Loctite 11g epoxy resin adhesive is a two-component, ultra-fast, transparent, cloudy, colourless to pale yellow cyanoacrylate/acrylic hybrid gel that bonds together plastics, rubbers, and metals. It provides a fast fixture at room temperature and is used where complete cure ...
Whether joining, adhering, attaching, repairing, potting, panel or ...
Description:
Whether joining, adhering, attaching, repairing, potting, panel or structural bonding, use 3M™ Scotch-Weld™ Epoxy Adhesive DP460. Our 60 minute work-life adhesive gives the highest shear, peel, impact, vibration and fatigue resistance in the Scotch-Weld™ Epoxy Adhesive familyUse 3M™ Scotch-Weld™ Epoxy ...