RS PRO Silver Conductive Paint Paint, 20 g Bottle

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Electrically Conductive Paint

This silver conductive paint is primarily used to repair PCB tracks or manually draw a simple circuit. The paint can be used in various ways including to paint-on an electrical screen, or to make electrical connections on non-solderable surfaces.

Product Features

● Touch-dry in around 10 min and usable within your circuit in 30 minutes.
● For full mechanical and electrical properties you should bake it once it is dry at between 121°C to 148°C for 5 mins to 10 mins.

Product Warnings

This paint is flammable.

How to repair a damaged PCB trace

● Identify the damaged area.
● Remove the damaged solder and PCB trace using a scalpel or sharp knife.
● Clean the affected area with a lint-free cloth and isopropyl alcohol.
● Shake bottle vigorously before beginning and replace bottle cap when not in use.
● Paint the new trace (for very fine trace lines, use electrical tape to mask off the area and remove once painted for a clean straight line).
● Leave for 30 minutes then bake for 5 to 10 minutes for maximum mechanical and electrical properties.

Note

Shake vigorously before using and replace cap when not in use.

Warning

  • Flammable
Specificaties
Kenmerk Waarde
Product Type Paint
Conductive Element Silver
Package Type Bottle
Package Size 20 g
Cure Time 30 min
Applicator Type Brush
Special Features Quick Drying
Chemical Composition N-Butyl Acetate, Silver, 2-Butoxyethyl Acetate, 2-Methoxy-1-Methylethyl Acetate
Physical Form Liquid
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
105,03
(excl. BTW)
127,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 105,03
6 - 14
€ 100,83
15 +
€ 98,74
Related Products
The pen contains a silver loaded polymer which ...
Description:
The pen contains a silver loaded polymer which can be used to repair faulty tracks, link components, make smooth jumpers and shield delicate electronics. Easy to make instant conductive silver tracesCan be used on both rigid and flexible materials, including ...
The Chemtronics 0.25oz silver conductive epoxy is a ...
Description:
The Chemtronics 0.25oz silver conductive epoxy is a two-part adhesive used in prototype, repair and general conductive bonding with a volume resistivity of less than 0.001ohm-cm. It features strong mechanical bond, excellent electrical conductivity and quick room temperature curing. The ...
The Kontakt Chemie heat sink compound is an ...
Description:
The Kontakt Chemie heat sink compound is an excellent choice for your PCBs, control assemblies and electronic components. The thermal paste helps improve the thermal connection of your processors.
Introducing the 9703 Electrically conductive tape from 3M™, ...
Description:
Introducing the 9703 Electrically conductive tape from 3M™, this pressure sensitive adhesive transfer tape anisotropic electrical conductivity. The adhesive is filled with silver particles enabling interconnections through the adhesive thickness (the Z axis) between substrates. Low outgassing acrylic ...