Deutsch QC Series 12 Way Wire Seal Quick Connectors IP68 Rated

  • RS-stocknr. 179-682
  • Fabrikantnummer QC220-12
  • Fabrikant Deutsch
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Wire Seals

Quick Connect Series

A range of hard wearing RoHS compliant, IP68 sealed electrical connectors. The thumb latch mechanism and chunky keyway allows for easy connection and disconnection. Back fittings enable either half to be panel mounted or sealed to a cable. A flange can be added for bulkhead mounting. Loose contacts can be soldered or crimped. The plug half is provided with a cap to protect the contacts when the mated pairs are uncoupled.

Constructed from Ultem® impact, temperature and corrosion resistant composite material, ideal for use with over-moulding and heat shrink tube
Positive thumb latch receptacle has pin contacts and the plug socket contacts
2, 7 and 12 way scoop proof plan forms

Specificaties
Kenmerk Waarde
Type Wire Seal
Connector Type Quick Connector
Number of Contacts 12
Series QC
IP Rating IP68
Material Silicone Rubber
440 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,972
(excl. BTW)
1,176
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 140
€ 0,972
€ 9,72
150 - 490
€ 0,946
€ 9,46
500 - 990
€ 0,921
€ 9,21
1000 - 2490
€ 0,897
€ 8,97
2500 +
€ 0,875
€ 8,75
*prijsindicatie
Related Products
SUPERSEAL Series 1.5 single wire seals made from ...
Description:
SUPERSEAL Series 1.5 single wire seals made from silicon rubber. These single wire seals are crimped simultaneously with the contacts. Sturdy and reliable contactsDouble contact spring designSecondary lock ensures correct and complete insertion of the contactSilicone rubber seals.
TE Connectivity Universal Mate-N-Lok splashproof connector interface seals ...
Description:
TE Connectivity Universal Mate-N-Lok splashproof connector interface seals for use with Universal Mate-N-Lok sealed connectors to create a splash proof/immersion proof connection when mating two free hanging connectors. These Universal Mate-N-Lok interface seals are made from silicone rubber and are ...
TE Connectivity Universal Mate-N-Lok connector wire seals essentially ...
Description:
TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board ...
For use with Modice Sealed Header System. Snap-in ...
Description:
For use with Modice Sealed Header System. Snap-in header simplifies module assemblyOptions include ferrite filtering and intergrated heat sinkResistant to most fluids used in industrial applicationsEnclosure and Headers manufactured from glass filled polymerSealing rated at IP65, IP66, IP67 and IP69K. ...