TE Connectivity MCP Series Wire Seal for Automotive Connectors

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

TE Connectivity Accessories for MCP Series Connectors

A range of accessories for use with the MCP series of connectors. Please refer to table for accessory descriptions and the specific ranges these MCP accessories can be used with.

TE Connectivity Multiple Contact Point System (MCP)

Specificaties
Kenmerk Waarde
Type Wire Seal
Connector Type Automotive
Series MCP
Colour Brown, Red
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-01-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 5000)
294,00
(excl. BTW)
355,74
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
1 +
€ 294,00
€ 1.470.000,00
*prijsindicatie
Related Products
A range of socket and pin crimp contacts ...
Description:
A range of socket and pin crimp contacts for the Econoseal J series automotive wire connectors. All connectors are designed to be used with thin walled non-irradiated PVC cablesThough designed initially for automotive applications, Econoseal III can be used in ...
Accessories for CMC Hybrid Connectors (see stock number ...
Description:
Accessories for CMC Hybrid Connectors (see stock number 723-9359 typically)723-9381 is a 1.5 mm cavity plug896-7431 is a 0.635mm cavity plug723-9384 is a Wire cap for 32 way774-8156 is a Wire cap for 28 and 48 way.
TE Connectivity Universal Mate-N-Lok splashproof connector interface seals ...
Description:
TE Connectivity Universal Mate-N-Lok splashproof connector interface seals for use with Universal Mate-N-Lok sealed connectors to create a splash proof/immersion proof connection when mating two free hanging connectors. These Universal Mate-N-Lok interface seals are made from silicone rubber and are ...
TE Connectivity Universal Mate-N-Lok connector wire seals essentially ...
Description:
TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board ...