TE Connectivity WingGrip Series Wire Nut

  • RS-stocknr. 782-5049
  • Fabrikantnummer CPGI-WC-WG-BL-BG-150
  • Fabrikant TE Connectivity
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: US
Productomschrijving

TE Connectivity WireGrip Connectors

WireGrip connectors or wire splices with industry standard colour coding for wire sizes 22 AWG to 10 AWG. WireGrip twist-on splices have square-wire spring threads which provide a positive grip for a secure connection and are made from UL 94V-2 flame retardant thermoplastic. Maximum operating temperature of 105°C. Maximum voltage rating for the splices is 600 V for building wiring and 1000 V maximum in light fixtures, luminaries and signs. The blue and grey WireGrip are rated at 300 V. These connectors are for use with copper to copper connections only.

Standards

UL 486C, CSA 22.2 No. 188

Specificaties
Kenmerk Waarde
Type Wire Nut
Series WingGrip
Material Thermoplastic
Colour Blue
84750 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 150)
0,042
(excl. BTW)
0,051
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
150 +
€ 0,042
€ 6,30
*prijsindicatie
Related Products
M12 flange mount bulkhead connectors from Murr Elektronik, ...
Description:
M12 flange mount bulkhead connectors from Murr Elektronik, offered in 4 way and 5 way male and female variants with A coding and TPE wires at 0.5 metres in length. The 4 wire versions (brown, white, black and blue) and ...
SUPERSEAL Series 1.5 single wire seals made from ...
Description:
SUPERSEAL Series 1.5 single wire seals made from silicon rubber. These single wire seals are crimped simultaneously with the contacts. Sturdy and reliable contactsDouble contact spring designSecondary lock ensures correct and complete insertion of the contactSilicone rubber seals.
Based on DIN 72585, this range of sealed ...
Description:
Based on DIN 72585, this range of sealed connectors has been developed to meet the demand for superior performance. Single piece, formed constructionTin platedWire seals are crimped individually with the contact.
TE Connectivity Universal Mate-N-Lok connector wire seals essentially ...
Description:
TE Connectivity Universal Mate-N-Lok connector wire seals essentially splash proof/immersion proof an existing universal mate-n-lok connector, two seals and one interface seal is required when mating two free hanging connectors, a closed bottom header is required for wire to board ...