Schneider Electric Contact & Light Block

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: ES
Productomschrijving

Pendant Control Station Accessories

A range of Schneider accessories from the Harmony XAC series for use with pendant control stations.

Suitable for all station types

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65
Fitted cable clamps and stepped cable entry boots
Mechanical interlocking between each pair of opposing pushbutton actuators
Adapters supplied for self-supporting pendant cable, with lug for chain support

Specificaties
Kenmerk Waarde
Block Type Contact & Light Block
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,83
(excl. BTW)
11,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 9,83
5 - 9
€ 9,42
10 +
€ 9,16
Related Products
Accepts stranded or solid wires with or without ...
Description:
Accepts stranded or solid wires with or without cable endsDifferent wire sizes can be used: Minimum: 1x24AWG/0.2mm2 without cable end, maximum: 2x14AWG/1.5mm2 without cable end, 2x16AWG/1.5mm2 with cable endsSingle lever action opens both cable clampsDesign prevents clamping on insulationVisible indication ...
CE Marked in compliance to relevant European Directive. ...
Description:
CE Marked in compliance to relevant European Directive. Screw terminationsDurable hook & snap interface to latchColour-coded plungers for easy circuit identificationBifurcation for superior contact wiping and optimal switching reliabilityLatch and contact block combinations available.Base mounted versions for use ...
A range of IP65 protected components which are ...
Description:
A range of IP65 protected components which are easily and quickly mounted in 16mm diameter holes. Each component can be ordered separately to build the required device. Also available are contact blocks with slow-break positive opening contacts with ’Faston’/solder connections. ...
A range of contact blocks suitable for use ...
Description:
A range of contact blocks suitable for use with ABB 22mm pilot devices. Robustly constructed, suitable for indoor or outdoor useIngress protection to IP65 with metric conduit entriesSupplied with contact block, additional contact blocks can be fittedEmergency stop complies with ...