Schneider Electric Contactor Varistor for use with LC1 Series, LC2 Series

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Schneider Electric Overload Relay Accessories

A range of accessories that can be used with the TeSys contactors and overload relays.

• Terminal Blocks can be screw mounted or clipped onto DIN rail

Specificaties
Kenmerk Waarde
Accessory Type Varistor
For Use With LC1 Series, LC2 Series
Series LAD4
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
14,70
(excl. BTW)
17,79
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 14,70
10 - 14
€ 14,29
15 +
€ 13,91
Related Products
Designed to create extremely compact motor starters, the ...
Description:
Designed to create extremely compact motor starters, the LR9 series can be mounted below the LC1-D115/150 and LC1-E contactors (1, 3 or 4 pole F range contactors), Featuring built in alarm function this range of overload relays have a high ...
On coil energisation the mechanical latch is engaged ...
Description:
On coil energisation the mechanical latch is engaged & holds the armature closed.This feature enables the contactors state to be maintained when re-starting after an interrupted cycle & allows power consumption reduction by enabling de-energisation of the contactor coil. Remotely ...
The Schneider Electric LC1D32V7 model is a 3-pole ...
Description:
The Schneider Electric LC1D32V7 model is a 3-pole contactor featuring a utilisation category of AC-1, AC-3 and AC-4. The control circuit voltage is 400 V AC 50/60 Hz with 1 NO + 1 NC auxiliary contact composition. The rated operation ...
Electric motor sizes are increasing, especially in applications ...
Description:
Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical ...