Schneider Electric Cable for use with TeSys U Series
- RS-stocknr.:
- 744-8077
- Fabrikantnummer:
- LU9RCD30
- Fabrikant:
- Schneider Electric
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10-06-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 33,57
(excl. BTW)
€ 40,62
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 33,57 |
| 10 - 14 | € 32,52 |
| 15 + | € 31,39 |
- RS-stocknr.:
- 744-8077
- Fabrikantnummer:
- LU9RCD30
- Fabrikant:
- Schneider Electric
Datasheets
Wetgeving en compliance
Productomschrijving
Connection Cables
Schneider Electric TeSys U
The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.
- Faster design with fewer components needed
- Quicker panel build with faster assembly time and fewer wires per starter
- Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
- Flexible and upgradeable with plug-and-play function modules
- Voltage and protection parameters can be determined after assembly and wiring
- Broad band electronic control unit provides improved overload protection with fewer components
- Expandable plug-and–play diagnostics
- Total co-ordination for fast return to service after a short circuit fault
Tesys model U is easy to select:
First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option
Specificaties
Kenmerk | Waarde |
|---|---|
| Accessory Type | Straight Bend Cable 3 m |
| For Use With | TeSys U Series |
| Series | LU9R |
- RS-stocknr.:
- 744-8077
- Fabrikantnummer:
- LU9RCD30
- Fabrikant:
- Schneider Electric