Schneider Electric Overload Relay NO/NC, 100 VA, 115 V ac

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Schneider Electric LT3-S Range

Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also be used to monitor surface temperature.

Automatic or manual reset
Remote reset
Fault storage with the supply switched off
Fault indication
Test function

Specificaties
Kenmerk Waarde
Control Voltage 115 V ac
Range TeSys
Contact Voltage Rating 250 V ac
Series LT3S
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 100 VA
Terminal Type Cage Clamp
Reset Method Automatic
Depth 100mm
Width 22.5mm
Length 100mm
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
Operating Temperature Range -25 → +60 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
99,37
(excl. BTW)
120,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 99,37
10 - 14
€ 96,61
15 +
€ 94,00
Related Products
The 3RU21 thermal overload relays up to 80 ...
Description:
The 3RU21 thermal overload relays up to 80 A have been designed for current-sensitive protection of loads with normal starting.These thermal overload relays for use with Sirius Size S0 & S00 Contactors. Switch position indicator and test functionSTOP buttonSelector switch ...
The TeSys LRD series from Schneider Electric is ...
Description:
The TeSys LRD series from Schneider Electric is a range of thermal overload relays with manual or automatic reset from 0.1 to 150 A and 0.06 to 75 kW providing greater automation control. Offering safe and effective protection LRD overload ...
Suitable for machine protection requirements where machinery may ...
Description:
Suitable for machine protection requirements where machinery may be subject to difficult starting, jamming, high resistive torque/high inertia and/or mechanical failure1 N/O and 1 N/C contactLED status indication: Voltage, Starting, Steady State, Overload, TripTrip status monitored: Over-Current, Rotor Locked, ...
Range of TeSys thermal relays for motor protection.Compensated, ...
Description:
Range of TeSys thermal relays for motor protection.Compensated, with automatic or manual reset, and trigger display.Equipped with test function.To be mounted on LC1 type contactors from the TeSys range.No direct fitting on old contactors (add panel ) for refs. LRD01 ...