Eaton Overload Relay NO/NC, 4 → 6 A, 6 A, 6 W, 500 V ac

  • RS-stocknr. 493-0393
  • Fabrikantnummer ZB12-6
  • Fabrikant Eaton
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

ZB Overload Relays

Protects the motor against phase failure or overload
Short circuit protection when fitted directly to a contact
Suitable for protection of Atex motors
Single phase sensitivity to IEC/EN 60947
When fitting overload relay remote from contactor or using more than one overload relay, use remote mounting base (stock no. 493-0488- ZB32 only)

Note

ZB12 have 5 pins, ZB32 have 4 pins.

Specificaties
Kenmerk Waarde
FLC Motor Rating 4 → 6 A
Control Voltage 500 V ac
Contact Current Rating 6 A
Contact Voltage Rating 690 V ac
Mounting Style Direct Contactor
Series ZB
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Power Rating 6 W
Terminal Type Screw
Reset Method Automatic, Manual
Width 45mm
Depth 88mm
Length 120mm
Maximum Operating Temperature +55°C
Operating Temperature Range -5 → +55 °C
Minimum Operating Temperature -5°C
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
43,47
(excl. BTW)
52,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 43,47
10 - 14
€ 41,71
15 +
€ 39,90
Related Products
This range of overload relays are for use ...
Description:
This range of overload relays are for use with the MEM Eaton enclosed starters.
Mechanical ResetVertical mouting106 x 45 x 58mm (H ...
Description:
Mechanical ResetVertical mouting106 x 45 x 58mm (H x W x D)Ingress protection to IP65Overload relays only for the discontinued 4kW (AC3) D.O.L starter.
Provide protection to motors or other machines which ...
Description:
Provide protection to motors or other machines which require the temperature of their windings to be monitored and not exceeded, otherwise serious damage may occur. a.c. or d.c. operating voltagesRated current; 6ADIN rail mountingCan be screw mounted using adaptor (stock ...
These are for use with DILM contactors DILM40 ...
Description:
These are for use with DILM contactors DILM40 to DILM65. Fits below DILM 40 to DILM65 contactorsProvides short circuit protection for motorsWhen fitting overload relay remote from contactor, or using more than one overload relay, use remote mounting base (stock ...