Schneider Electric TeSys F LC1F 3 Pole Contactor, 3NO, 185 A, 100 kW

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Schneider Electric Contactors - LC1D TeSys D Series

Electric motor sizes are increasing, especially in applications such as HVAC+R and large industrial processes. In response, Schneider Electric is extending the TeSys range of block type contactors for AC3 duty. TeSys F Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LC1F series has been designed for integration in control systems and for motor control or resistive load applications. The TeSys F contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• North American and International terminal markings • Panel mounted with supplied screws
• Bidirectional peak limiting diode suppressor to protect the coil
• Fully tested, approved, and certified by national and international bodies: IEC, CCC, CSA, UL
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications
• For AC supply refer to the LX9 coils and for a DC supply refer to LX4 coils

Applications:

• Industrial control systems
• Switching contractors or relay coils
• Powering control and signalling switches

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.
Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Simplified design, installation and maintenance

The TeSys F series features a flexible design with a wide range of compatible components to support design requirements. A wide range of auxiliaries provide additional contacts where needed and drawer-mounted coils allow easy maintenance and reduce downtime.

Is the TeSys F range a double break pole type contactor?

Yes the TeSys F range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LC1F185 Contactor

The LC1F185 model is a coil less 3 pole contactor that offers long mechanical and electrical life and a consistent low-voltage architecture to ensure safe and reliable operation. The LC1F185 offers an AC-3 full load current rating of 185 A.

Specificaties
Kenmerk Waarde
Number of Poles 3
Contact Current Rating 185 A
Power Rating 100 kW
Range TeSys F
Series LC1F
Normal State Configuration 3NO
Auxiliary Contact Configuration 3NO
Contact Voltage Rating 1 kV ac
Terminal Type Screw
Width 168.5mm
Minimum Operating Temperature -5°C
Length 174mm
Depth 181mm
Maximum Operating Temperature +55°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13-08-2020, met een levertijd van 1 werkdag.
Prijs Each
666,06
(excl. BTW)
805,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 666,06
Related Products
TeSys K Miniature Reversing Contactors from Schneider Electric ...
Description:
TeSys K Miniature Reversing Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and for inductive motor applications. The TeSys K contactors offer ...
Professional range TeSys LC1D AC3 contactors. Typical application ...
Description:
Professional range TeSys LC1D AC3 contactors. Typical application includes resistive loads and motor control. All models are highly reliable and excellent quality. 3 PoleDIN Rail mountScrew mount terminalsIP20 front face.
TeSys K Miniature Contactors from Schneider Electric combine ...
Description:
TeSys K Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and for inductive motor applications. The TeSys K contactors offer quick ...
TeSys D Contactors from Schneider Electric combine long ...
Description:
TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of ...