ABB AF Series Contactor, 24 V ac/dc Coil, 3-Pole, 160 A, 55 kW, 3NO, 690 V ac
- RS-stocknr.:
- 800-7232
- Fabrikantnummer:
- 1SFL427002R1111 AF116-30-11B-11
- Fabrikant:
- ABB
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22-05-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 616,25
(excl. BTW)
€ 745,66
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 616,25 |
- RS-stocknr.:
- 800-7232
- Fabrikantnummer:
- 1SFL427002R1111 AF116-30-11B-11
- Fabrikant:
- ABB
Wetgeving en compliance
Vrijgesteld
- Land van herkomst:
- SE
Productomschrijving
AF Range Contactors, 3 Pole
AF contactors are AC/DC operated
AF09-AF38 contactors include an electronic coil interface accepting a wide control voltage Ucmin - Ucmax. Only four coils cover control voltages 24 → 500 Vac or 20 → 500 Vdc
AF..Z contactors equipped with a Z coil type allow direct control by 24 Vdc, 500 mA PLC output and obtain a reduced holding coil consumption
AF.Z contactors withstand short dips and voltage interruptions (SEMI F47-0706 compliance)
AF40-AF96 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC, these contactors are of the block type design with 3 main poles.
AF116-AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC
AF190-AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC, these contactors are of the block type design with 3 main poles.
AF contactors have built in surge protection and does not require any additional surge suppressors
AF09-AF38 contactors include an electronic coil interface accepting a wide control voltage Ucmin - Ucmax. Only four coils cover control voltages 24 → 500 Vac or 20 → 500 Vdc
AF..Z contactors equipped with a Z coil type allow direct control by 24 Vdc, 500 mA PLC output and obtain a reduced holding coil consumption
AF.Z contactors withstand short dips and voltage interruptions (SEMI F47-0706 compliance)
AF40-AF96 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC, these contactors are of the block type design with 3 main poles.
AF116-AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC
AF190-AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC, these contactors are of the block type design with 3 main poles.
AF contactors have built in surge protection and does not require any additional surge suppressors
Standards
IEC 60947-1 / 60947-4-7 and EN 60947-1 / 60947-4-1
Specificaties
Kenmerk | Waarde |
|---|---|
| Coil Voltage | 24 V ac/dc |
| Number of Poles | 3 |
| Contact Voltage Rating | 690 V ac |
| Contact Current Rating | 160 A |
| Range | AF116 |
| Series | AF |
| Power Rating | 55 kW |
| Normal State Configuration | 3NO |
| Number Of Auxiliary Contacts | 2 |
| Terminal Type | Lug Ring Terminal |
| Width | 150mm |
| Length | 90mm |
| Depth | 126mm |
| Maximum Operating Temperature | +70°C |
| Pole and Throw Configuration | 3P |
| Minimum Operating Temperature | -40°C |