Power Supply Red Lion MLPS2000 for use with CUB4, CUB5, DT8 Panel Meters

  • RS-stocknr. 905-5614
  • Fabrikantnummer MLPS2000
  • Fabrikant Red Lion
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Accessories for CUB Series Meters

Accessories for use with CUB Series Meters.

DIN Rail Mount Kit
The BMK11 (905-5425) can be used to mount a CUB5 meter or a MLPS (905-5614) in various applications. If a DIN Rail mounted display is needed simply add the DIN rail clips to the back of the kit, install the meter and snap it on the rail. For base mount application, simply use the appropriate mounting screws to securely fasten the BMK11 kit.

Base Mount Kit
The BMK8 (905-5428) base mount kit is designed for use with CUB7 series products. The base mount is constructed of steel with a textured black finish includes four mounting bolts and nuts.

USB programming Option Card
The plug-in card (905-5513) plugs into the main circuit board of any CUB5 series meter. It works in conjunction with the Crimson® programming software and enables the user to configure CUB5 meter on a PC.

• USB virtual comms port
• 300-38.4k baud rate

Power Supply
The MLPS (905-5614) is a DC power supply that is designed to attach to the rear of a CUB4, CUB5 or DT8 panel meter. It supplies power for the meter and if it needs current for sensors that may be connected to the meter.

• 24V dc
• 200 mA

Red Lion

Specificaties
Kenmerk Waarde
Accessory Type Power Supply
For Use With CUB4, CUB5, DT8 Panel Meters
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
47,50
(excl. BTW)
57,48
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 47,50
5 - 9
€ 45,14
10 +
€ 42,75
Related Products
All units have a panel cut out of ...
Description:
All units have a panel cut out of 68 x 33mm and have resettable displays. High-precision 8-character counter and tachometer with period measurementFor simultaneous reading of events, positions, travel lengths and speedsStandard LCD or LCD display, backlight can be switched ...
Description:
All units have a panel cut out of 68 x 33mm and have resettable displays. High-precision 8-character counter and tachometer with period measurementFor simultaneous reading of events, positions, travel lengths and speedsStandard LCD or LCD display, backlight can be switched ...
The timer CUB 7T register the operating time ...
Description:
The timer CUB 7T register the operating time of machinery and equipment. Timer CUB7T with 8-digits-LCD-DisplayProgrammable with keypads on the frontsideInternal lithium battery provides up to 7 years of typical uninterrupted operationsHoused in a lightweight, high impact plastic case with ...
6-digit tachometer with LED displayLeading zero suppression provides ...
Description:
6-digit tachometer with LED displayLeading zero suppression provides very good readabilityInput max. 35 kHz, can be adapted to virtually all sensorsHigh precision through continuous period measurementDecimal point can be freely configuredEasy programming using keyboardWith sensor power 12 Vdc.