Tempatron RS PRO, LED, Counter, 100Hz, 240 V ac

  • RS-stocknr. 341-480
  • Fabrikantnummer DIV-01-110/240VAC
  • Fabrikant Tempatron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Programmable Count Controller - Divider Unit

Progammable count controller for use in applications which utilise pulse or electronic sensor techniques. Typical applications include; batch control, flow meter control and pre scaling, preset conveyor routing, automatic machine lubrication control, metering pump control, PLC input prescaling and pulse control sequencing.

Provides an output pulse after a preset number of input pulses
Input/Output divide ratio 1 to 4095
Output pulse adjustable between 0.1 and 5 seconds
Maximum input pulse rate 100Hz ( can be set to 5Khz)
Built in 12 and 24 volt power supplies to provide power to sensors, displays etc
NPN output for driving LCD counters etc
DIN rail or surface mounting

Supplied with

full instructions.

Specificaties
Kenmerk Waarde
Supply Voltage 240 V ac
Count Mode Pulse
Display Type LED
Input Type Voltage
Connection Type Screw
Mounting Type PCB Mount
Output / Interface Relay
Maximum Count Frequency 100Hz
Cutout Size 160 x 90 mm
Minimum Operating Temperature -10°C
Depth 54mm
Cutout Width 160mm
Weight 580g
Series RS PRO
Maximum Operating Temperature +45°C
Approvals RoHS
Cutout Height 90mm
Maximum Temperature +65°C
Function Impulse Counter
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
145,27
(excl. BTW)
175,78
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 145,27
Related Products
Sentron series electronic time counters are used for ...
Description:
Sentron series electronic time counters are used for accurately monitoring production and service times, which enables the exact planning and monitoring of production sequences. The accuracy of the counters also enables them to monitor maintenance cycles and warranty times.There are ...
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
LED tachometers, 4 x 10-mm high red LED ...
Description:
LED tachometers, 4 x 10-mm high red LED digits.Displays speeds, rates and frequencies.Measures feedthrough time.NPN, PNP, NAMUR, TTL or sinusoidal pulsed input signal from 100 → 600 Vac.Displayed in seconds, minutes or hours.Measurement principle based on measuring the period of ...