Simex 6 Digit, LED, Pulse Counter, 90Hz, 24 V ac

  • RS-stocknr. 144-3696
  • Fabrikantnummer SLIK-638-24VDC
  • Fabrikant Simex
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

SLIK-638 Universal Pulse Counter

SLIK-638 universal programmable counters are encased in a secure, wall-mounted housing. The counters are equipped with a 6-digit LED display and have 2 independent counting inputs. The inputs can operate in various configurations, either pulse or quadrate. The SLIK-638 can be configured without the need to open the casing by using either remote controller, local keyboard or with free S-Config software via the RS485 communication port.

Features and Benefits

Ultra-bright red, green and blue LED display
6 38 mm high digits
IP67 Housing
Batching function
2 Pulse counting inputs + 1 programmable function input
1 Counter reset input
Binary outputs REL/OC
Digital debouncing filter
4 Counter reset sources (manual, ext, auto, Modbus)
Free configuration software S-Config

Simex

Specificaties
Kenmerk Waarde
Supply Voltage 24 V ac
Count Mode Pulse
Display Type LED
Input Type Pulse
Connection Type Cable
Reset Method Auto, Ext, Manual, Modbus
Number of Digits 6
Mounting Type Wall Mount
Output / Interface RS485 Interface
Count Direction Uni-Directional
Digit Height 38 mm
Maximum Count Frequency 90Hz
Display Range -99999 → 999999
Weight 1.2kg
Minimum Operating Temperature 0°C
Depth 140mm
Maximum Operating Temperature +50°C
Meter Type Counter/Preset Counter
Series SLIK-638
Function Counter
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
447,12
(excl. BTW)
541,02
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 447,12
Related Products
The Hengstler 886 series digital counter is an ...
Description:
The Hengstler 886 series digital counter is an 8-digit, panel mount without reset totalising device. This counter has a voltage input device that has a supply voltage rating of 24VDC. The counter requires a rear connection via shrouded push-on terminals ...
6-digit tachometer with LED displayLeading zero suppression provides ...
Description:
6-digit tachometer with LED displayLeading zero suppression provides very good readabilityInput max. 35 kHz, can be adapted to virtually all sensorsHigh precision through continuous period measurementDecimal point can be freely configuredEasy programming using keyboardWith sensor power 12 Vdc.
LED tachometers, 4 x 10-mm high red LED ...
Description:
LED tachometers, 4 x 10-mm high red LED digits.Displays speeds, rates and frequencies.Measures feedthrough time.NPN, PNP, NAMUR, TTL or sinusoidal pulsed input signal from 100 → 600 Vac.Displayed in seconds, minutes or hours.Measurement principle based on measuring the period of ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...