Baumer 6 Digit, Counter, 10Hz, 230 V ac

  • RS-stocknr. 163-5966
  • Fabrikantnummer F574.65/220VAC
  • Fabrikant Baumer
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

F 574 Series 6-digit electro-mechanical totalising counters

6-digit electro-mechanical totalising counters.
Counting speed for pulse / pause ratio = 1:
- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited
- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.
Supplied with plug-in solder clips.
Screw mounting on front face.

Specificaties
Kenmerk Waarde
Supply Voltage 230 V ac
Count Mode Impulses
Input Type Voltage
Connection Type Plug
Number of Digits 6
Mounting Type Panel Mount
Count Direction Up
Maximum Count Frequency 10Hz
Series F574
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
67,44
(excl. BTW)
81,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 67,44
Related Products
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
Sentron series mechanical counters are used for accurately ...
Description:
Sentron series mechanical counters are used for accurately monitoring production and service times, which enables the exact planning and monitoring of production sequences. The accuracy of the counters also enables them to monitor maintenance cycles and warranty times.The mechanical counters ...
SLIK-638 universal programmable counters are encased in a ...
Description:
SLIK-638 universal programmable counters are encased in a secure, wall-mounted housing. The counters are equipped with a 6-digit LED display and have 2 independent counting inputs. The inputs can operate in various configurations, either pulse or quadrate. The SLIK-638 can ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...