Hengstler 6 Digit, LED, Digital Counter, 5kHz, 230 V ac

  • RS-stocknr. 200-1106
  • Fabrikantnummer 0 732 021
  • Fabrikant Hengstler
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Zero/Single Preset - Counter/tachometer/timer

Multifunction units housed in a panel mounting case (DIN 43700)
Prescaler option - multiplier programmable from 0.001 to 9.999 (counter and tachometer modes)
The unit may be set in any of three modes: Counter Mode; Tachometer Mode; Time Meter Mode
Counter mode: can be programmed for quadrature, differential, count/direction
Tachometer mode: incoming pulses are counter per gate time, which can be pre-selected. Over speed or under speed can also be indicated
Time meter mode: programmable time ranges and decimal point
45 x 45mm panel cutout

Hengstler Digital Counter

The Hengstler TICO 732 series digital counter is a single preset and multifunctional panel mount device that includes a timer, counter and tachometer. This counter has a voltage input simple to program. It also has a 6-digit LED display. It has a voltage rating of 230VAC. The user can set the unit in counter mode, tachometer mode, and time meter mode. The counter mode and time meter mode can be programmed for quadrature, differential, and count/direction. Whereas in the case of tachometer mode, incoming pulses are counter per gate time that can be pre-selected. The user can also indicate over-speed or under-speed and time meter mode that are programmable time ranges and decimal points. This counter has a maximum count frequency of 5KHz.

Features and Benefits

• Keypad locking function
• Prescaler option - Multiplier programmable from 0.001 to 9.999
• Plug-in screw terminal connection
• Front dimensions is 48mm x 48mm
• Bi-directional counting
• Programmable NPN or PNP inputs
• Operating temperature ranges between 0°C and 50°C

Applications


Industrial counting applications
• Control and monitoring systems
• Manufacturing assembly lines

Certifications


IP65 rated

Hengstler Panel Mounting 48 x 48

Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are either NPN/PNP signal or contact closure.

Specificaties
Kenmerk Waarde
Supply Voltage 230 V ac
Count Mode Hours
Display Type LED
Input Type Voltage
Connection Type Screw
Reset Method Automatic, Manual
Number of Digits 6
Mounting Type Panel Mount
Digit Height 7.6 mm
Maximum Count Frequency 5kHz
Display Range -99999 → 999999
Measurement Range -99999 → 999999
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Series TICO 732
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
203,76
(excl. BTW)
246,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 203,76
5 - 9
€ 195,47
10 +
€ 186,99
Related Products
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
Sentron series mechanical counters are used for accurately ...
Description:
Sentron series mechanical counters are used for accurately monitoring production and service times, which enables the exact planning and monitoring of production sequences. The accuracy of the counters also enables them to monitor maintenance cycles and warranty times.The mechanical counters ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...