Omron 6 Digit, LCD, Digital Counter, 5kHz, 12 → 24 V dc, 24 V ac

  • RS-stocknr. 687-6140
  • Fabrikantnummer H7CX-AUD1-N
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Ultra Compact Multifunction Counter / Tachometer - Series H7CX

H57CX series of ultra-compact preset multi function counters/tachometers provide complete functionality in a wide range of applications.Features and Benefits

Features and Benefits

• Three-colour display value red, green or orange (except H7CX-A11 models)
• Increased character height and display segments (10 mm)
• Simple operation using UP/DOWN keys for digits
• Twin counter-mode
• Reliable - setting upper limit restricts the set time and helps prevent incorrect settings
• Service Life Notification - the number of times that the control output turns ON is counted and an alarm is displayed when a preset count is exceeded
• Input contact NPN or PNP

Specificaties
Kenmerk Waarde
Supply Voltage 12 → 24 V dc, 24 V ac
Count Mode Seconds
Display Type LCD
Input Type Voltage
Connection Type Screw
Reset Method Automatic, Manual
Number of Digits 6
Mounting Type Panel Mount
Output / Interface Contact
Count Direction Bi-Directional
Digit Height 10 mm
Maximum Count Frequency 5kHz
Display Range -99999 → 999999
Weight 130g
Measurement Range -99999 → 999999
Series H7CX
Minimum Operating Temperature -25°C
Maximum Operating Temperature +85°C
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
269,90
(excl. BTW)
326,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 269,90
Related Products
Miniature flush mount adding counter5 digits, 4.2mm high500 ...
Description:
Miniature flush mount adding counter5 digits, 4.2mm high500 strokes per minuteRight hand strokeNon-resettableSwitching distance: 46° to 49°Dimensions: H24 x W32 x D22.5mm.
Progammable count controller for use in applications which ...
Description:
Progammable count controller for use in applications which utilise pulse or electronic sensor techniques. Typical applications include; batch control, flow meter control and pre scaling, preset conveyor routing, automatic machine lubrication control, metering pump control, PLC input prescaling and pulse ...
These 6-digit electronic pulse counters use an E2PROM ...
Description:
These 6-digit electronic pulse counters use an E2PROM memory that can not be erased and operates without batteries. This technology was first developed for military applications, and is ideal for applications in harsh environments.They are fully solid state and sealed(IP65 ...
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...