RS PRO 6 Digit, LED, Digital Counter, 20kHz, 230 V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TR
Productomschrijving

96 x 48 Programmable Counter- Single Set

Single set programmable counters designed to be used in a comprehensive range of applications. It has a 96 x 48 mm mounting, making this Counter highly versatile from both a mounting and function perspective.

Features and Benefits

6-Digit LED display
Set, reset direction and enter membrane buttons
24 V & 230 V options available
NEMA 4X Protection (IP65 frontal, IP20 rear)
SPST relay output rated at 5A @ 250 V (Resistive Load)
Supports NPN/PNP operation
Inputs for capacitive & proximity sensors and an encoder
INC, DEC, INC/INC, INC/DEC, Up/Down, x1/x2/x4 counting with phase shfiting property
Manual & automatic reset options

Suitable Applications

Machine processing of glass, marble, plastic, sheet iron & fabric
Filling systems
Quality control roller systems
Packaging machinery
Measurement automation

Standards

GOST-R & CE Approved

Specificaties
Kenmerk Waarde
Supply Voltage 230 V ac
Count Mode Impulses
Display Type LED
Input Type Transistor
Connection Type Screw Clamp
Reset Method Automatic, Manual
Number of Digits 6
Mounting Type Panel Mount
Output / Interface Relay
Count Direction Bi-Directional
Digit Height 8 mm, 13.2 mm
Maximum Count Frequency 20kHz
Display Range 0 → 99.99
Depth 96mm
Minimum Operating Temperature 0°C
Function Counter
Maximum Operating Temperature +50°C
Cutout Size 96 x 48 mm
Cutout Width 48mm
Weight 240g
Maximum Temperature +50°C
Approvals CE; GOST-R
Meter Type Electronic
Measurement Range 0 → 99.99
Series RS PRO
Cutout Height 96mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
50 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
108,44
(excl. BTW)
131,21
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 108,44
Related Products
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...
6-digit tachometer with LED displayLeading zero suppression provides ...
Description:
6-digit tachometer with LED displayLeading zero suppression provides very good readabilityInput max. 35 kHz, can be adapted to virtually all sensorsHigh precision through continuous period measurementDecimal point can be freely configuredEasy programming using keyboardWith sensor power 12 Vdc.