Wachendorff 8 Digit, LED, Digital Counter, 100kHz, 24 → 230 V ac/dc

  • RS-stocknr. 819-9748
  • Fabrikantnummer TA327401
  • Fabrikant Wachendorff
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

TA327401 - Tachometer

The compact small tachometer TA327401 allows to read the frequency (max 100 kHz) of a signal from single or double (bidirectional encoder) input. 2 universal digital inputs are available (NPN/PNP/contact) for external commands like output activation or Hold/ Stop current visualization; one input it is also analogue in order to allow setpoint modification by external potentiometers.
Due to the two different modes and the indication of the rotating direction, the tachometer is usable for a lot of different applications. In addition to an excellent cost effectiveness and high quality, the counter offers a rugged, compact housing and a brilliant display.

Tachometer with rotating direction indication in 32 x 74 mm format
Input frequency up to 100 kHz
2-line LED display
Two red indicators for status relays outputs and a yellow indicator for serial communication
Easy programming by front keys or software
Two relay outputs
Universal AC/DC power supply
Programming kit with USB cable available (stock-no. 819-9745)

Panel Mounting 74x32

Specificaties
Kenmerk Waarde
Supply Voltage 24 → 230 V ac/dc
Display Type LED
Input Type Transistor
Connection Type Screw
Number of Digits 8
Mounting Type Panel Mount
Output / Interface Analogue
Count Direction Bi-Directional
Digit Height 7.6 (Lower) mm, 10.2 (Upper) mm
Maximum Count Frequency 100kHz
Meter Type Tachometer with rotating direction indication
Approvals UL94V0
Cutout Size 28.5 x 70.5 mm
Weight 100g
Cutout Height 28.5mm
Function Counting Direction, Hold, Lock, Setpoint Input
Depth 53mm
Minimum Operating Temperature 0°C
Cutout Width 70.5mm
Maximum Operating Temperature +40°C
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
149,32
(excl. BTW)
180,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 149,32
Related Products
Sentron series mechanical counters are used for accurately ...
Description:
Sentron series mechanical counters are used for accurately monitoring production and service times, which enables the exact planning and monitoring of production sequences. The accuracy of the counters also enables them to monitor maintenance cycles and warranty times.The mechanical counters ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Counts down pulses from a pre-set value and ...
Description:
Counts down pulses from a pre-set value and triggers a changeover contact on reaching zeroContacts return to original position when counter is reset to zeroElectrical connection via supplied plug in clipsOffers IP40 protection with cover (sold seperately)SPDT contact rated to ...
All units are non-resettable and are continuously rated,Counters ...
Description:
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the ...