- RS-stocknr.:
- 877-5513
- Fabrikantnummer:
- 1.130.200.056
- Fabrikant:
- Kübler
41 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 37,01
(excl. BTW)
€ 44,78
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 37,01 |
5 - 9 | € 35,89 |
10 + | € 34,41 |
- RS-stocknr.:
- 877-5513
- Fabrikantnummer:
- 1.130.200.056
- Fabrikant:
- Kübler
Datasheets
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
Type K07 - micro cumulative counter, 7-digit, front panel mounting
Compact, 7-digit counter
For front panel and print mounting
Minimal space required due to small size
Highly shock-resistant
Low energy consumption
Magnifying windows enable digits displayed to appear 4 mm in height
Visibility of display comparable with larger counters
DC voltage type with solder connections
For front panel and print mounting
Minimal space required due to small size
Highly shock-resistant
Low energy consumption
Magnifying windows enable digits displayed to appear 4 mm in height
Visibility of display comparable with larger counters
DC voltage type with solder connections
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
Specificaties
Kenmerk | Waarde |
---|---|
Count Mode | Impulses |
Input Type | Voltage |
Connection Type | Solder Pin |
Reset Method | No Reset |
Number of Digits | 7 |
Mounting Type | Panel Mount |
Output / Interface | Voltage |
Count Direction | Up |
Digit Height | 4 mm |
Cutout Size | 30 x 13 mm |
Function | Counter |
Meter Type | Electromechanical |
Maximum Operating Temperature | +60°C |
Depth | 32.7mm |
Minimum Measurement | 0 |
Minimum Operating Temperature | -10°C |
Approvals | cULus, RoHS, UL |
Measurement Range | 0 → 9999999 |
Series | K 07.20 |
Cutout Width | 35mm |
Cutout Height | 15mm |