End Cap for use with 5SH5 5 MCB, 5ST3 7 MCB

  • RS-stocknr. 521-5061
  • Fabrikantnummer 5ST3748
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Series 5ST3 7 Bus-Bar System

With pin connections
Cut-to-length bar
For 1 or 3-phase line protective switches of the series 5SJ6 and 5SY
No additional connection terminal required for stranded connection up to 35mm²
Excellent accessibility for feeder cable
50→90A load at infeed single-sided/in-centre for 10mm²; 65→120A for 16mm²
Pin type connection
Material: Cu (10mm²); 16mm² fully insulated
Lug spacing: 18mm

Standards

DIN 57606, DIN 57659

Standards

DIN 57606, DIN 57659

Siemens Distribution Boards & Accessories

Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type C characteristic offers short circuit response of 5-10 x normal rated current, making it ideal for circuits with higher inrush currents such as motor control and fluorescent lighting installations in industrial buildings where nuisance tripping might occur if a faster type was used.

Specificaties
Kenmerk Waarde
Accessory Type End Cap
Range Sentron
For Use With 5SH5 5 MCB, 5ST3 7 MCB
1153 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
1,02
(excl. BTW)
1,23
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1,02
Related Products
Ensures that cable ends are waterproof and permits ...
Description:
Ensures that cable ends are waterproof and permits long term storage without risk of moisture penetration. It is a medium wall moulded cap internally coated with an adhesive sealant.,Installation is simple, the cap is centred over the end of the ...
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (MegaOhms). 1-pole magnetic hydraulic CBE with trip free snap action mechanism with toggle actuation.Industry standard dimensions with medium delay for most applications.Typically used on control equipment, communication ...
RFID - Radio-frequency Identification - can replace traditional ...
Description:
RFID - Radio-frequency Identification - can replace traditional bar-coding and electro-magnet tags as a method of product tracking. The OsiSense XG system operates at 13.65Mhz, and uses tag readers that are compatible with almost all tags conforming to ISO 18000-3, ...
3/8 inch or M12 (mm) moulded thread-neck single-hole ...
Description:
3/8 inch or M12 (mm) moulded thread-neck single-hole panel mounting6.3-0.8 mm blade terminalsSmall physical sizeTease free, Trip free mechanism for long lifePush to release/push to resetOn/off status indicationOverload and short circuit protectionTypical life 5000 operation at twice nominal current ratingMainly ...