RS PRO Insulated Crimp Bootlace Ferrule, 8mm Pin Length, 1.1mm Pin Diameter, 0.25mm² Wire Size, Blue

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Insulated German Colour Coded Bootlace Ferrules

From RS Pro a range of high-quality German colour coded bootlace ferrules (also known as cord end terminals) for providing a clean end termination to multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting wires to terminal blocks and captive terminals.

What Is a Bootlace Ferrule?
A bootlace ferrule is a metal tube or ferrule with a moulded colour coded insulating collar made from nylon. The ferrule is slipped over the end of a multi-stranded wire, crimped and then inserted into a screw or spring clamp connection.

Where is a Bootlace Ferrule Used?
When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used, the insulated funnel with it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection

Features and Benefits
• Excellent electrical connection
• Reduces short circuits
• German colour coded collar for easy ferrule size identification
• Nylon insulated collar for reduced leakage, creepage and gas intrusion
• Tin plated copper tube for excellent conductivity
• Crimped terminal can be repeatedly inserted and removed without degrading end of the wire

Applications
Bootlace ferrules are used on multi-stranded wires that are being inserted into screw terminals and terminal blocks. Applications include consumer units, circuit breakers, electrical control panels and any equipment where there is a requirement for a multi-stranded wire connection.

Questions and Answers

How to Crimp a Bootlace Ferrule
Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule (insulated collar first) onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal

Suitable Crimping Tools
For ferrules with a wire size range of 0.5 to 6 mm2 use crimping tool stock number 683-1605
For ferrules with a wire size range of 10 to 25 mm2 use crimping tool stock number 683-1614
For ferrules with a wire size range of 0.5 to 16 mm2 use crimping pliers stock number 464-482
For ferrules with a wire size range of 35 or 50 mm2 use crimping tool stock number 683-1617

Note

Length quoted is Pin Length

Approvals

-

Specificaties
Kenmerk Waarde
Maximum Wire Size mm² 0.25mm²
Pin Diameter 1.1mm
Insulation Material Nylon
Number of Entries 1
Colour Blue
Pin Length 8mm
Insulation Insulated
Maximum Wire Size AWG 26AWG
Overall Length 12.4mm
73700 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
371000 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,072
(excl. BTW)
0,087
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,072
€ 7,20
500 - 2400
€ 0,065
€ 6,50
2500 - 4900
€ 0,057
€ 5,70
5000 - 9900
€ 0,046
€ 4,60
10000 +
€ 0,032
€ 3,20
*prijsindicatie
Related Products
A range of industrial standard German colour coded ...
Description:
A range of industrial standard German colour coded insulated bootlace ferrule crimp terminals. These insulated bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The terminals ...
These insulated ends comprise a tinned copper tube ...
Description:
These insulated ends comprise a tinned copper tube and a coloured rilsan™ moulding.The universal tool can be used to crimp cable ends from 0.25 mm2 → 6 mm2.
A range of tubular end sleeves or bootlace ...
Description:
A range of tubular end sleeves or bootlace ferrules.
Ferrules with insulating flangeProvide an equipotential link for ...
Description:
Ferrules with insulating flangeProvide an equipotential link for all the strands of a copper flexible conductorActive part in tinned electrolytic copperSingles - supplied in stripsCross-section : 0.34 mm²Colour : greenNumber of strips or sachets : 10Number of ferrules per strip ...