Schneider Electric DZ5CE Series Insulated Crimp Bootlace Ferrule, 8mm Pin Length, 2mm Pin Diameter, 1.5mm² Wire Size,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Cable ends 0.25 → 16 mm2

Cable ends consisting of a tin-plated copper tube.
The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.
These ends are available for conductors with cross-sections from 0.25 → 16 mm2, in different colours.
Versions with short or long ends for use according to application.
Ends are packaged in small boxes of 100 pieces.

Standards

NF C 63-023; DIN 46228

Specificaties
Kenmerk Waarde
Maximum Wire Size mm² 1.5mm²
Pin Diameter 2mm
Number of Entries 1
Insulation Material Plastic
Colour Black
Pin Length 8mm
Insulation Insulated
Maximum Wire Size AWG 16AWG
Overall Length 14mm
Series DZ5CE
6500 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 500)
0,05
(excl. BTW)
0,06
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
500 - 1000
€ 0,05
€ 25,00
1500 - 2500
€ 0,042
€ 21,00
3000 - 4500
€ 0,035
€ 17,50
5000 - 9500
€ 0,032
€ 16,00
10000 +
€ 0,03
€ 15,00
*prijsindicatie
Related Products
Ferrules available in the French colour code range ...
Description:
Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped ...
A range of industrial standard French colour coded ...
Description:
A range of industrial standard French colour coded insulated bootlace ferrule crimp terminals. These insulated bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The terminals ...
Starfix® is a cable end design that offers ...
Description:
Starfix® is a cable end design that offers a time saving of up to 50% compared to a standard connector.Simple, reliable and economic, this system allows crimping and cabling to be carried out in the same place.
Stripax plus pliers allow you to cut, strip ...
Description:
Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm2 and crimp wire-end ferrules with the same cross section.Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 ...