TE Connectivity 0.156 Series Insulated Female Crimp Bullet Connector, 1mm² to 2.6mm², 17AWG to 13AWG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity PIDG Crimp Bullet Connectors

PIDG (Pre-Insulated Diamond Grip) bullet connectors consisting of receptacle and plug terminals designed for uniform reliability in the most difficult circuit environments. These PIDG crimp bullet connectors consist of a precision-formed high conductivity copper body and barrel. Serrations inside the wire barrel provide maximum contact and tensile strength after crimping. The wire barrel is surrounded with a copper sleeve which provides wire insulation support. An outer colour coded nylon sleeve allows easy identification of wire size. These PIDG crimp bullet connectors also feature a funnelled wire entry which allows fast wire insertion during high-speed production. The construction of these PIDG terminals and the use of specialised tool dies allows a uniform and reliable crimp to be achieved
Available with various wire, barrel and stud sizes, these PIDG bullet terminals offer a versatile solution to a wide range of wiring applications

Features and Benefits

• High conductivity copper body
• Copper sleeve for improved wire insulation support
• Serrations in wire barrel for maximum contact and tensile strength
• Colour coded sleeves for easy wire size and tooling identification
• Funnelled wire entry for easy wire insertion
• Design enables a reliable and uniform crimp

Application

These PIDG crimp bullet connectors are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.

TE Connectivity PIDG Terminals

Specificaties
Kenmerk Waarde
Series 0.156
Insulation Insulated
Insulation Material Nylon
Gender Female
Overall Length 24.7mm
Minimum Wire Size mm² 1mm²
Maximum Wire Size mm² 2.6mm²
Minimum Wire Size AWG 17AWG
Maximum Wire Size AWG 13AWG
Bullet Diameter 4mm
Colour Blue
Contact Plating Tin
Contact Material Brass
600 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1300 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,994
(excl. BTW)
1,203
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,994
€ 99,40
500 - 2400
€ 0,96
€ 96,00
2500 - 4900
€ 0,928
€ 92,80
5000 - 9900
€ 0,898
€ 89,80
10000 +
€ 0,87
€ 87,00
*prijsindicatie
Related Products
Duraseal bullet terminal constructed of tin plated brass ...
Description:
Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve. • The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important• Kits ...
Male and female insulated bullet crimp terminals available ...
Description:
Male and female insulated bullet crimp terminals available in a variety of wire size ranges. These solderless insulated bullet crimp terminals have a tin plated copper sleeve, tin plated brass terminals and colour-coded vinyl insulation.
A range of RS Pro fully insulated female ...
Description:
A range of RS Pro fully insulated female double crimp bullet terminals with a copper sleeve and flared vinyl insulation. These insulated female crimp bullet wire terminals are colour coded for use with different wire sizes. All models are highly ...
PIDG (Pre-Insulated Diamond Grip) wire pin crimp terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire pin crimp terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire crimp pin terminals consist of a precision-formed high conductivity copper body and barrel. Inside the barrel are serrations which ...