TE Connectivity DuraSeal Series Insulated Female Crimp Bullet Connector, 0.5mm² to 1mm², 22AWG to 18AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Duraseal - Bullet Terminal

Duraseal bullet terminal constructed of tin plated brass with a heat shrinkable insulation sleeve.

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specificaties
Kenmerk Waarde
Series DuraSeal
Insulation Insulated
Insulation Material Nylon
Gender Female
Overall Length 30mm
Minimum Wire Size mm² 0.5mm²
Maximum Wire Size mm² 1mm²
Minimum Wire Size AWG 22AWG
Maximum Wire Size AWG 18AWG
Bullet Diameter 4mm
Colour Red
Contact Plating Tin
Contact Material Copper Alloy
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Bag of 1000
763,22
(excl. BTW)
923,50
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 763,22
€ 0,763
*prijsindicatie
Related Products
Red 0.5 - 1.5 mm²Blue 1.5 - 2.5 ...
Description:
Red 0.5 - 1.5 mm²Blue 1.5 - 2.5 mm²Yellow 4.0 - 6.0 mm².
PIDG (Pre-Insulated Diamond Grip) bullet connectors consisting of ...
Description:
PIDG (Pre-Insulated Diamond Grip) bullet connectors consisting of receptacle and plug terminals designed for uniform reliability in the most difficult circuit environments. These PIDG crimp bullet connectors consist of a precision-formed high conductivity copper body and barrel. Serrations inside the ...
Male and female insulated bullet crimp terminals available ...
Description:
Male and female insulated bullet crimp terminals available in a variety of wire size ranges. These solderless insulated bullet crimp terminals have a tin plated copper sleeve, tin plated brass terminals and colour-coded vinyl insulation.
A range of RS Pro fully insulated female ...
Description:
A range of RS Pro fully insulated female double crimp bullet terminals with a copper sleeve and flared vinyl insulation. These insulated female crimp bullet wire terminals are colour coded for use with different wire sizes. All models are highly ...