TE Connectivity DuraSeal Butt Wire Splice Connector, Red, Insulated, Tin Plated 22 → 18 AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Splices

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Approvals

UL

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 22 → 18 AWG
Overall Length 36mm
Diameter 3.7mm
Insulation Insulated
Colour Red
Series DuraSeal
Contact Material Copper
Contact Plating Tin
6150 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17450 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
0,417
(excl. BTW)
0,505
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 200
€ 0,417
€ 20,85
250 - 1200
€ 0,354
€ 17,70
1250 - 2450
€ 0,313
€ 15,65
2500 - 4950
€ 0,271
€ 13,55
5000 +
€ 0,229
€ 11,45
*prijsindicatie
Related Products
PLASTI-GRIP closed barrel parallel splice wire crimp terminals ...
Description:
PLASTI-GRIP closed barrel parallel splice wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP parallel splice crimp terminals is serrated in order ...
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both ...
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...