TE Connectivity DuraSeal Butt Wire Splice Connector, Blue, Insulated, Tin Plated 16 → 14 AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Splices

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 16 → 14 AWG
Overall Length 31.5mm
Diameter 4.6mm
Insulation Insulated
Colour Blue
Series DuraSeal
Contact Material Copper
Contact Plating Tin
16150 op voorraad - levertijd is 2 werkdag(en).
Prijs 1 Box of 1000
480,01
(excl. BTW)
580,81
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
€ 480,01
€ 0,48
*prijsindicatie
Related Products
Clear shell push-wire connectors accommodate any combination of ...
Description:
Clear shell push-wire connectors accommodate any combination of 0.8 - 3.0mm² solid copper, or 'tinned end' multistrand copper conductors. Fast and easy no-twist push-in connectorsVisual confirmation of every connection and strip length shown on mouldingWire removal simply effectedRated to 105°CProbe ...
Quick Splice IDC wire splice connectors made from ...
Description:
Quick Splice IDC wire splice connectors made from brass with a colour coded nylon insulation. These Quick Splices provide a simple and time saving wire connection method. The splice is simply placed over the existing wire, the additional wire inserted ...
PIDG wire caps for use with either stripped ...
Description:
PIDG wire caps for use with either stripped or unstripped wire ends. These PIDG wire caps consist of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a ...
Ideal Industries 30-5021EU In-Sure™ push-in connector starter kit, ...
Description:
Ideal Industries 30-5021EU In-Sure™ push-in connector starter kit, is a comprehensive introduction to the In-Sure™ push-in connector range, containing 110 In-Sure™ push-in connectors in a sturdy box, a versatile selection designed to cater for many wiring installation applications. Contains 30 ...