TE Connectivity Tap Wire Splice Connector, Yellow, Insulated, Tin Plated 11 10 AWG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity ELECTRO-TAP Splices

ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when closed. Please see additional data table for insulation diameter and tap wire range.

Can be applied using standard pliers

Approvals

-

Specificaties
Kenmerk Waarde
Splice Type Tap
Wire Size 11 10 AWG
Overall Length 17.5mm
Diameter 16.2mm
Insulation Insulated
Colour Yellow
Insulation Material Glass Filled Nylon
Shrouded/Unshrouded Shrouded
Contact Material Brass
Contact Plating Tin
810 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
1,515
(excl. BTW)
1,833
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 1,515
€ 15,15
100 - 490
€ 1,364
€ 13,64
500 - 990
€ 1,212
€ 12,12
1000 - 4990
€ 1,136
€ 11,36
5000 +
€ 1,06
€ 10,60
*prijsindicatie
Related Products
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
*Please note this product is now sourced from ...
Description:
*Please note this product is now sourced from an RS PRO supplier due to high demand*Gel filled and gas tight, the RS PRO splice connectors are widely used in the telecoms industry and other fine wire applications. Wires are simply ...
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
Clear shell push-wire connectors accommodate any combination of ...
Description:
Clear shell push-wire connectors accommodate any combination of 0.8 - 3.0mm² solid copper, or 'tinned end' multistrand copper conductors. Fast and easy no-twist push-in connectorsVisual confirmation of every connection and strip length shown on mouldingWire removal simply effectedRated to 105°CProbe ...