- RS-stocknr.:
- 782-4768
- Fabrikantnummer:
- D-436-37-COLD
- Fabrikant:
- TE Connectivity
Dit product is momenteel niet beschikbaar voor nabestelling.
We hebben dit product helaas niet op voorraad en het is op dit moment niet beschikbaar voor nabestelling.
Toegevoegd
Prijs Per stuk
€ 13,84
(excl. BTW)
€ 16,75
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 13,84 |
- RS-stocknr.:
- 782-4768
- Fabrikantnummer:
- D-436-37-COLD
- Fabrikant:
- TE Connectivity
Datasheets
Wetgeving en compliance
- Land van herkomst:
- MX
Productomschrijving
TE Connectivity Cold Applied In-Line Splices
Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end
Note
An AD-1381 or approved M22520/44-01 crimp tool must be used for proper installation of these devices.
Standards
Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12
Under qualification for SAE AS81824 and AS81824/12
Splices
Specificaties
Kenmerk | Waarde |
---|---|
Splice Type | Butt |
Wire Size | 18 → 16 AWG |
Overall Length | 38.7mm |
Insulation | Insulated |
Colour | Blue |