TE Connectivity Closed End Wire Splice Connector, Natural, Tin Plated 22 → 14 AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

TE Connectivity Closed End Splices

Closed end splices available with nylon or vinyl insulation that accept a combination of solid and stranded wires for single and multiple applications. These insulated closed end splices are made from copper with a tin finish. For wire size, colour, opening diameter and insulation material please see additional data table.
A hand crimping tool is available for crimping size 22-14 AWG splices, please see stock number 431-8901

Wire range 22-14 awg
UL & CSA approved
Robust, high quality splice tool Stock no. 431-8901 available

Approvals

UL & CSA

Specificaties
Kenmerk Waarde
Wire Size 22 → 14 AWG
Overall Length 17.27mm
Diameter 8.71mm
Insulation Material Nylon
Contact Material Copper
Contact Plating Tin
Thickness 2.36mm
Colour Natural
800 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,172
(excl. BTW)
0,208
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,172
€ 17,20
500 - 2400
€ 0,151
€ 15,10
2500 - 4900
€ 0,131
€ 13,10
5000 - 9900
€ 0,11
€ 11,00
10000 +
€ 0,098
€ 9,80
*prijsindicatie
Related Products
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
SOLISTRAND STRATO-THERM standard type heat resistant butt splice ...
Description:
SOLISTRAND STRATO-THERM standard type heat resistant butt splice crimp terminals for use where operating temperatures prevent standard insulated crimps being used. These STRATO-THERM heat resistant butt splice crimp terminals are made from nickel plated electrolytic copper and are designed to ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both ...
PIDG knife disconnect wire crimp terminals consisting of ...
Description:
PIDG knife disconnect wire crimp terminals consisting of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a copper sleeve and the whole is encased in a nylon ...